Loading ...
Loading ...
Loading ...
33
Oven Controls
To set the controls for a 4 hour cleaning cycle to start immedi-
ately and shut off automatically:
It is recommended to use a 2 hour clean cycle for light soils, a 3
hour cycle for average soils, and a 4 hour cycle for heavy soils.
1. Turn both the oven mode and oven temperature selectors to
CLEAN. The display will show a 4 hour time (normal clean).
2. Use the and
keys quickly to select a 2 or 4
hour time if desired. If this is not done completely, the arrow
keys will vanish from the display.
3. Once the control accepts a clean time, the REMOVE RACKS
message will blink in the display. If the door is open the
CLOSE DOOR message will also appear. If the user does
not shut the door within 3 minutes of the display showing
the door open message, the control will cancel the Clean
function.
Important: When the oven is set to run a self-clean cycle, the
motor door lock will begin locking the oven door. Do not open
the oven door while the lock motor is running or when any
locking indicators or displays are showing. The oven door is
completely locked in about 15 seconds.
Important: It is recommended to remove all non-porcelain oven
racks from the oven during self-clean cycles, but the porcelain
Glide Rack may be left in the oven if the rack is soiled. After a
self-clean cycle, or anytime the gliding is rough, the glide rack
should be treated with graphite lubrication.
4. After the REMOVE RACKS message ends the oven door will
begin locking. Do not attempt to open the door while the
motor door latch mechanism is locking.
5. CLn and the lock icon will appear in the display when the
door is fully locked. The oven will start the Clean function.
6. The time left in the clean will be displayed under the CLn
message.
When the Clean time ends:
Do not force the oven door open when self-
clean is active. This can damage the automatic door-locking
system. Use caution when opening the door after self-clean is
complete; the oven may still be very hot.
The oven bake and broil elements may appear
to have cooled after they have been turned off. The elements
may still be hot and burns may occur if these elements are
touched before they have cooled.
1. CLn will change to Hot in the display and the lock icon will
remain visible. The oven door remains locked until the oven
has cooled to a safe temperature and the motor door lock
unlocks automatically.
2. When the temperature falls to the safe level, the display
will fade out Hot from the timer display.
3. The display will then fade in
--- (dashes) to prompt user to
rotate both the oven mode and temperature selector knobs
to the OFF position.
Loading ...
Loading ...
Loading ...