Loading ...
Loading ...
Loading ...
19
English
CLEANING THE BASE
1. Turn humidier off and unplug.
Note: Be sure you are near a sink or an area that will not be damaged by water. Excess water will ush
from heat element cover when disassembling.
WARNING: To avoid overlling the base, remove the water tanks before the power head to
avoid water displacement.
2. Disassemble humidier:
– Remove water tanks rst.
– Next remove water tank support rods by pulling the rods outward.
– Then remove power head by turning power head counterclockwise to release from base and
remove the magnetic base cover and all silicone parts. WARNING: Do not grasp outlet grill to
remove power head, it may be hot.
3. Clean base and silicone parts with warm water and a mild detergent. Rinse and dry.
4. Reassemble humidier:
– Ensure the magnetic base cover and silicone parts are back in place.
WARNING: Do not run humidier without the silicone parts.
– Turn power head clockwise to re-attach to base:
- First align arrows as shown on power head and magnetic base (A).
- Next turn power head clockwise until power head locks
into place.
– Replace water tank support rods then water tanks.
A
A
Loading ...
Loading ...
Loading ...