Loading ...
Loading ...
Loading ...
12
CLEANING AND MAINTENANCE
WARNING!
When replacing the bulb, let the bulb cool, and assure that power to the rangehood has
been turned off. Use new bulbs according to that indicated on the rangehood nameplate.
Carbon filter for all recirculating installations
(Optional: HS60LXW4, HS60XW4, HS90X4)
(With product: HS60LRX4)
Active carbon filters are disposable items designed to remove grease and odours from
cooking vapours before the air is channelled back into the kitchen. The active carbon
filters must be replaced periodically to work properly, at least every three months,
depending on the frequency with which the rangehood is used.
Note:
Fully saturated carbon filters can become a barrier to air movement, impeding the
rangehood’s performance.
In the event of fire, fully grease laden filters could be flammable and therefore regular
replacement is recommended.
Replacement
To replace carbon filters (C), proceed as follows:
1
Remove aluminium filter (A).
2
To remove carbon filter undo and remove the screw (B).
3
To install follow above steps in reversed order.
A
B B
C
CB
C
B
Fig.7 carbon filter replacement
Light bulb replacement
(230 Volt / 50 Watt light bulb)
1
To replace a light bulb, first disconnect rangehood from power supply.
2
Apply finger pressure to the face of the light bulb and twist one quarter turn anti-
clockwise, the light bulb will now be free to drop out.
3
Remove the faulty bulb and fit replacement bulb into the lamp holder.
4
Refit the light bulb, applying finger pressure and twist one quarter turn clockwise.
Note: replacement bulbs are not covered by Manufacturer’s Warranty.
Loading ...
Loading ...
Loading ...