Loading ...
Loading ...
Loading ...
Operation
Setting Button
The humidity level can be set within a range of 30%RH to 80%RH in 5% increments.
When it start work, it will first automatically detect and show the humidity(and
temperature) in the room, then you can press or hold the Setting Buttons to change
the humidity selection in 5% increments. (After you have set the desired humidity,
the readout will display the actual room humidity.) When the room humidity level
overtake or drops to the level you set, the dehumidifier will automatically begin
working or stop. When the humidity level is set at 30%RH, the dehumidifier will be at
CONTINUOUS dehumidifying mode.
Timer Button
The TIMER function enables you to either Delay Start or Delay Stop the unit in the
choice from 1 hour to 24 hours. If the unit is running, then selecting Timer will turn
the unit off in the hours that will be set (Delay Stop). If the unit is off, then selecting
Timer will turn the unit on in the hours that will be set (Delay Start).
TIMER setting: Pressing or holding the Timer Button to change the delay timer at 1
hour increments, up to 24 hours. After TIMER setting finishes, the control will
display the time remaining (8,7,6, etc.) until the unit either starts or stops. If then
pressing TIMER button again, the control will display the room temperature like
before. After that, pressing TIMER button again at any time will stop the TIMER
function. For the Delay Start, the fan speed and humidity maintained will be the
same as previous setting. Adjusting the timer setting to 0.0 will cancel the Auto
Start/Stop function.
NOTE
- Before entering TIMER setting, make sure power is being supplied to the unit.
- Before entering TIMER setting, make sure pressing Setting Button sets one
desired room humidity first.
-5-
Loading ...
Loading ...
Loading ...