Loading ...
Loading ...
Loading ...
Cadillac XT4 Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
13527548) - 2020 - CRC - 4/11/19
246 VEHICLE CARE
1. Engine Air Cleaner/Filter 0 250.
2. Engine Oil Fill Cap. See Engine Oil
0 246.
3. Engine Oil Dipstick. See Engine
Oil 0 246.
4. Engine Cooling Fan (Out of
View). See Cooling System 0 251.
5. Brake Fluid Reservoir. See Brake
Fluid 0 257.
6. Battery - North America 0 258.
7. Engine Coolant Surge Tank and
Pressure Cap. See Cooling System
0 251.
8. Positive (+) Battery Terminal
(Under Cover). See Jump Starting
- North America 0 305.
9. Windshield Washer Fluid
Reservoir. See Washer Fluid
0 255.
10. Engine Compartment Fuse Block
0 265.
11. Remote Negative (-) Battery
Terminal. See Jump Starting -
North America 0 305.
Engine Oil
To ensure proper engine per formance
and long life, careful attention must
be paid to engine oil. Following these
simple, but important steps will help
protect your investment:
.
Use engine oil approved to the
proper specification and of the
proper viscosity grade. See
“Selecting the Right Engine Oil” in
this section.
.
Check the engine oil level regularly
and maintain the proper oil level.
See “Checking Engine Oil” and
“When to Add Engine Oil” in this
section.
.
Change the engine oil at the
appropriate time. See Engine Oil
Life System 0 248.
.
Always dispose of engine oil
properly. See “What to Do with
Used Oil” in this section.
Checking Engine Oil
Check the engine oil level regularly,
every 650 km (400 mi), especially prior
to a long trip. The engine oil dipstick
handle is a loop. See Engine
Compartment Overview 0 245 for the
location.
{
Warning
The engine oil dipstick handle may
be hot; it could burn you. Use a
towel or glove to touch the dipstick
handle.
If a low oil Driver Information Center
(DIC) message displays, check the oil
level.
Follow these guidelines:
.
To get an accurate reading, park
the vehicle on level ground. Check
the engine oil level after the
engine has been off for at least
two hours. Checking the engine oil
level on steep grades or too soon
after engine shutoff can result in
incorrect readings. Accuracy
improves when checking a cold
engine prior to start ing. Remove
the dipstick and check the level.
Loading ...
Loading ...
Loading ...