Loading ...
Loading ...
Loading ...
27
EN
Your dryer is equipped with various automatic safety
functions. These enable failures to be detected in good
time and the safety system can react appropriately.
These failures are frequently so minor that they can be
removed within a few minutes.
TROUBLESHOOTING
GUIDE & AFTER-SALES
SERVICE
Problem Possible Cause Solution
DRYING TAKES TOO LONG
LAUNDRY IS NOT DRY ENOUGH
Selected programme not
optimum for type of laundry
• Select the programme
matching best the type of
laundry; refer to section
PROGRAMMES
Door lter or bottom lter
clogged
• Clean the lters according to
the instructions in section CARE
AND MAINTENANCE
Laundry too wet • Make sure that laundry is spun
with the maximum spin speed
before drying. If laundry was
spun with spin speed below 800
rpm, the water tank may get full
during the drying programme.
The ambient temperature is too
high
• The ambient temperature is
ideal between 15 and 20°C. If the
ambient temperature is higher,
air the room.
“Gentle option” selected • The “Gentle option” should
only be selected with small loads
Loading ...
Loading ...
Loading ...