Loading ...
Loading ...
Loading ...
EN7
RECOMMENDED POT POSITION
For best performance, when you use two pots simultaneously, put them according to the pictures below:
POWER LEVEL TABLE
Power level Type of cooking
Level use
(indicating cooking experience and habits)
Max. power
Boost Fast heating
Ideal for rapidly increasing the temperature of food to fast boiling in the case of water
or rapidly heating cooking liquids.
9-7
Frying - boiling Ideal for browning, starting to cook, frying frozen products, fast boiling.
High power
Browning - slow frying -
boiling - grilling
Ideal for slow frying, maintaining a high boil, cooking and grilling (short duration,
5-10 minutes).
7-5
Browning - cooking - stewing -
slow frying - grilling
Ideal for slow frying, maintaining a low boil, cooking and grilling (medium duration,
10-20 minutes), preheating.
Medium power
Cooking - stewing -
slow frying - grilling
Ideal for stewing, maintaining a gentle boil, cooking and grilling (long duration).
4-3
Cooking - simmering -
thickening - creaming pasta
Ideal for prolonged cooking (rice, sauces, roasts, sh) with liquids (e.g. water, wine,
broth, milk), creaming pasta.
Ideal for prolonged cooking (volumes of less than a litre: rice, sauces, roasts, sh)
with liquids (e.g. water, wine, broth, milk).
Low power 2-1
Melting - defrosting -
keeping food hot -
creaming risottos
Ideal for softening butter, gently melting chocolate, thawing small products and
keeping just-cooked food hot (e.g. sauces, soups, minestrone).
Ideal for keeping just-cooked food hot, creaming risottos and keeping serving dishes
warm (with induction-suitable accessory).
OFF Zero power Support surface Hob in standby mode or off (possible end-of-cooking residual heat, indicated by “H”).
NOTE:
When making quick-cook foods that require perfect heat distribution (e.g. pancakes) on the 28 cm double cooking zone (where present), use pans no greater
than 24 cm in diameter. For delicate cooking (for example, melting chocolate or butter) use the smaller diameter single zones.
INSTALLATION
After unpacking the product, check for any damage during transport. In case of problems, contact the dealer or the After-Sales Service.
For built-in dimensions and installation instruction, see the pictures in page 2.
PREPARING THE CABINET FOR FITTING
WARNING
6-7 cm
min. 20 mm
min. 5 mm
57
75
80
• Install a separator panel under the hob.
• The lower part of the product must not be
accessible after installation.
• Do not t the separator panel if an undertop oven
is installed.
• The distance between the underside of the appliance and the separator panel must respect the dimensions given in the gure.
• In order to ensure the correct operation of the product, do not obstruct the minimum required clearance between the hob and the top of the unit (min. 5 mm).
• If an undertop oven is installed, make sure the oven is equipped with a cooling system.
• Do not install the hob above a dishwasher or washing-machine, so that the electronic circuits do not come into contact with steam or moisture which could
damage them.
• To remove the hob, use a screwdriver (not provided) to prise off the perimeter clips on the underside of the appliance.
Loading ...
Loading ...
Loading ...