Loading ...
Loading ...
Loading ...
LOCATION OF YOUR WASHER
Do Not Install the Washer:
1. In an area exposed to dripping water or outside
weather conditions. The ambient temperature
should never be below 60°F (15.6°C) for proper
washer operation.
2. In an area where it will come in contact with curtains
or drapes.
3. On carpet. The floor MUST be a hard surface with
a maximum slope of 1/2″ per foot (1.27 cm per
30 cm). To make sure the washer does not vibrate
or move, you may have to reinforce the floor.
IMPORTANT:
Minimum Installation Clearances
• When installed in alcove: Sides, Rear,
Top = 0″ (0 cm)
• When installed in closet: Sides, Rear,
Top = 0″ (0 cm), Front = 1″ (2.54 cm)
• Closet door ventilation openings required:
2 louvers each 60 square in. (387 cm
2
), located 3″
(7.6 cm) from top and bottom of door
Undercounter Installation
If an undercounter* installation is desired, you MUST
install a top sheet kit, 14-A037. This kit is available through
your GE retailer.
*Custom-sized countertop is required.
Mobile Home Installation
Installation must conform to Standard for Mobile Homes,
ANSI A119.1 and National Mobile Home Construction
and Safety Standards Act of 1974 (PL93-383).
Installation Instructions
12
ROUGH-IN DIMENSIONS
17
24 1
60
(43.2)
(1.9)
(62.9)
(152.4)
(2.54)
1
(3.81)
(85)
3
4
3
4
1
2
33
1
2
Power
Cord
Adjustable Legsinch (cm)
SIDE
(7.3)
2
(80.3)
31
(91.5)
36
Water
Inlets
Under
Counter
BACK
7
8
(67.9)
26
3
(29.8)
11
3
4
4
(87.9)
34
5
8
5
8
Loading ...
Loading ...
Loading ...