Loading ...
Loading ...
Loading ...
SECTION 4 OTHERTH,NGSTOKNOW
! !
4A. DIMENSIONS/SPECIFICATIONS
BYPASS VALVES
• z/t..
SINGLE-PLASTIC
PULL STEM
OUTWARD
FOR
SERVICE
Push
Inward
\_ For
/ _ Bypass
SINGLE-BRASS
SH
Bypo,,'1 o
ISERVICE
3-VALVE
SERVICE
Close Bypass Valve
Open Inlet & Outlet Valves
BYPASS
Open Bypass Valve
Close Inlet & Outlet Valves
Outlet
Bypass
Valve
Inlet
Valve
A
F
/ ----- \
/
I
-_-B_
/
/ •
J
C
[
E
INCHES CM
A Salt Tank Height 40-1/4 102.2
B Resin Tank Diameter (nominal) 8 20.3
C Resin Tank Height (nominal) 40 101.6
D Inlet-Outlet Height 41-1/2 105.4
E Overall Height 46 116.8
F1 Length 19-1/2 49.5
F2 Width 16-1/2 41.9
-- Distance between inlet-outlet 3-3/8 8.6
center lines
MODEL NO. 625.3484400 AND 625.3484500 TIMER SR CODE SR21
NOTE:
Please see the rating decal f_r water softener operating capacity, salt usage and service flow rate/pressure
loss perfbrmance specifications. Performance specifications are validated by the Water Quality Associa-
tion (WQA). The rating decal is located on the rim, under the salt hole cover (see page 28).
WATER SUPPLY TO WATER SOFTENER
MINIMUM WATER SYSTEM FLOW (gpm) 3
MINIMUM-MAXIMUM WATER PRESSURE (psi) 20-120
MAXIMUM WATER TEMPERATURE (°F) 120
MAXIMUM WATER HARDNESS (gpg) 90*
MAXMUM "CLEAR WATER" IRON (ppm) 5
SALT FOR WATER SOFTENER
TYPE OF SALT NEEDED Nugget/Pellet
ALTERNATE TYPE OF SALT Pure, evaporated, compacted
water softener salt
STORAGE CAPACITY (pounds) 200
OTHERS
TYPE OF ION EXCHANGE MATERIAL (resin) High Capacity
AMOUNT OF RESIN (cu.ft.) .77
REGENERATION (RECHARGE) CYCLE TIME (min.)
FILL 9-21
BRINING/BRINE RINSE 48-71
BACKWASH 7
FAST RINSE 3
TOTAL REGENERATION TIME 73-108
gpm = gallons per minute
gpg = grains per gallon
psi = pounds per square inch
ppm = parts per million
*Do not exceed this number when setting hardness in step 2,
page 7. The maximum setting available is 95.
18
Loading ...
Loading ...
Loading ...