Loading ...
Loading ...
Loading ...
49-80612-3 7
Care and Cleaning
Stainless Steel Hood
For your
safety
Pour votre
securité
Before servicing or cleaning the unit, switch
power off at the service panel and lock the
service panel to prevent power from being
switched on accidentally. If the service
panel cannot be locked, securely fasten a
prominent warning device, such as a tag, to
the service panel.
Avant de réparer ou de nettoyer votre
appareil, débranchez le courant au niveau
du panneaude service et verrouillez les
mécanismes de débranchement de service
pour éviter tout branchement accidentel au
courant. Si vous ne pouvez pas verrouiller les
mécanismes de débranchement de service,
attachez soigneusement un avertissement
bien visible,comme une étiquette, au
panneau de service.
Metal grease
filter
Hood
surfaces
Clean the grease filter after 30 hours of “on”
time. A red signal light will alert you when 30
hours has passed.
Remove the grease filters and wash them
either by hand or in the dishwasher using
nonabrasive soap.
To clean, swish the filters in hot soapy water
or wash them in the dishwasher. Do not use
abrasive cleansers.
Replace the filters and make sure that they
are correctly seated in the filter channels.
Adjust as necessary until the red signal light
stops glowing.
Do not use a steel-wool pad; it will scratch
the surface.
To clean the stainless steel surface, use warm,
sudsy water or a stainless steel cleaner or
polish. Always wipe the surface in the direction
of the grain.
Follow the cleaner instructions for cleaning
the stainless steel surface. To inquire about
purchasing stainless steel appliance cleaner
or polish or to find the location of a dealer
nearest you, please call our toll-free number:
Monogram Preferred Service: 800.444.1845
Monogram.com
NOTE:7RUHPRYH¿OWHUV
push them back and
down using the knob.
Front
)RUSURSHURSHUDWLRQPDNHVXUHWKH¿OWHUV
are securely seated into the channels.
Loading ...
Loading ...
Loading ...