Rev. : 02 (04T15)
Fuzzy
Fuzzy Wash (Normal Wash)
Wool Wash
Quick Wash
Silent Wash
Jeans Wash
Favorite Wash
Soak Wash
Eco Cotton
Tub Clean
Air Dry
Delay Start (Reservation) Wash
Rev. : 02 (04T15)
Cold
Hot
Fuzzy (Normal) Wash
Jeans Wash
Eco Cotton
Wool Wash
Favorite Wash
Silent Wash
Quick Wash
Soak Wash
Tub Clean
Delay Start Wash
Option Wash
Favorite
Quick Wash
Soak
Delay Start
Spin, Rinse/Spin, Rinse, Wash/Rinse, Wash, Wash/Rinse/Spin
Soak/Wash/Rinse/Spin
Hot
Warm
Cold
Water Temp
Cold
Hot
Cold
Cold
Warm
Warm
Hot
Time Left, Delay Start
(Reservation), Alarm Indication
Delay Start (Reservation) Button
Program Button
Fuzzy
Wool
Quick Wash
Jeans
Eco
Cotton
Silent
Favorite
Tub Clean
Fuzzy
Delay Start Indication (Reservation)
Delay Start (Reservation)
(Res.=Delay)
Program
Wool
Quick Wash
Jeans
Eco
Cotton
Water Detergent
Water Detergent
START / PAUSE
Water Level
Water Level
Hot/Cold
Water Level
Hot
Eco Cotton Warm Water level 4
Wash 40 rinse 1 spin 9
Rev. :01 (03T15)
Soak
Fuzzy
Jeans
Silent
Favorite
Program
Soak
Wool
Quick Wash
Tub Clean
Wash Soak
Wash
Soak
Soak
Wash
Water Level
Water-Detergent
START / PAUSE
Water Level
Favorite Favorite
Temp
Water
Water
Wash
Rinse
Spin
Favorite
Favorite
Favorite
Program
Program
Tub Clean
Water
Air Dry
Tub Dry
Wash
Rinse
Wash
Rinse
Rinse
Spin
Water
Rev. : 02 (04T15)
Program
Wool
Tub Clean
Delay Start (Reservation)
Delay
Time Left
Delay Start
(Reservation)
Water Detergent Water
Delay Start (Reservation)
START / PAUSE
Rinse Spin
Rinse Spin
Beeper
High HighLowOff
Beeper
Wash SpinRinse
High
Do not install the washer where it is directly exposed to sunlight, wind, rain etc.
Plug the power cord of this washer into a properly installed standard power point that is switched & earthed.
Your machine requires a floor drainage slope (or hole) that will SAFELY DISPOSE of the FULL
FLOW of any water that may leak out should the machine malfunction.
It is therefore the OWNER'S RESPONSIBILITY to make sure this machine is installed in an area with
a drain hole (or slope) that will prevent any possibility of water damage to floor coverings or property.
Permissible water temperature : Max 70°C(160°F)
Permissible water pressure : Max 80psi (550kpa, 8kg/cm
2
), Min 4psi (30kpa, 0.3kg/cm
2
)
If water temperature & pressure is greater than above, it may cause damage to the machine. If you
have uncontrolled water temperature & pressure you should fit a temperature & pressure relief valve
to ensure that water temperature & water pressure remains within the safe limits. Consult a plumber
or electrician if you are unable to adjust water temperature and pressure.
Do not over tighten the coupling nuts with a tool. Inlets are plastic : Do not strip or crossthread.
Rev. : 02 (04T15)
Cold
Warm
Hot
Warm
Hot/Cold
Hot
Hot
Cold
Hot
Tub Clean Program
M
emo
