WW95N54F5PW User Manual

Loading ...

32 English

Operations

Control panel

04 05

01 Cycle Selector Turn the dial to select a cycle.

02 Display

The display shows current cycle information and estimated time

remaining, or an information code when a problem occurs.

For buttons and icons, refer to the corresponding page..

Temp.

Press to change the water temperature for the current cycle.

The drum light turns off automatically after 2 minutes.

04 Rinse

Press to change the rinse count for the current cycle. You can set the

rinse count to a max of 5, depending on the cycle.

Spin

Press to change the spinning speed for the current cycle. The

revolutions per minute (RPM) differs with the model.

• Rinse Hold(No indicator): The nal rinse process is suspended

so that the laundry remains in the water. To unload the laundry,

run a drain or spin process.

- To use the Rinse Hold option, press Spin repeatedly until all

rpm numeric indicators turn off. Not available for the DRAIN/

SPIN cycle.

• No Spin

: The drum does not spin after the nal drain process.

• Spin Only: To run the Spin Only cycle, press Spin for 3 seconds.

When the cycle time and spinning speed appear, press Spin

repeatedly until a desired spinning speed is selected. Then,

press and hold Start/Pause to start the cycle. The spinning time

depends on the selected cycle.

06 Options

Press to select an option from Intensive and Pre Wash. Press again to

deselect.

WW95N54F5PW_DC68-04104B_EN.indd 32 2020/3/10 16:21:30

Loading ...

User Manual - Page 32