Loading ...
Loading ...
Loading ...
10
Initial startup requires no adjustments. When plugged in, the unit will begin operating under the factory default settings. If the unit
was turned o during installation, simply press and the unit will immediately switch on. To turn the unit o , press .
If the temperature displayed is di erent than selected, the unit is progressing towards the selected temperature. Time to reach set
point varies based upon ambient temperature, temperature of product loaded, door openings, etc. Viking recommends allowing
the unit to reach set points before loading.
NOTICE: Temperature displayed re ects actual temperature inside unit.
First Use
Control Operation
CONTROL FUNCTION GUIDE
Hidden
Button
This unit is Star-K certi ed. See www.star-k.org for more details.
FUNCTION COMMAND NOTES
ON/OFF Press and release Unit will immediately turn On or OFF
Adjust Temperature Press or and release
When the display is ashing, press or to adjust the
set point temperature. Note: temperature displayed is the
actual temperature inside unit
Toggle between
º
F /
º
C Hold and for 5 seconds The display will change units
Leave interior light on
Press and release to leave interior light on
for 12 hours; press again to deactivate
After 12 hours, factory default is restored; light will turn on
when door is open
Hide Display Hold hidden button and press
Display will turn o when door is closed. Unit will continue
to operate. Repeat command to turn on display
Adjust light color
While holding press and release to
scroll through lighting options
Option Open Door Closed Door
0 0 White White
0 1 Blue Blue
0 2 White Blue
Light will be set at full intensity when door is open, and 50%
intensity when door is closed.
Enable Sabbath Mode Press and hold for 5 seconds and release
The
o
F /
o
C symbol will ash brie y after 5 seconds. Interior
light and display will go dark and remain so until user resets
mode - unit continues to operate
Disable Sabbath Mode Press and release Display and interior light return to normal operation
Showroom Mode Hold and for 5 seconds
The
º
F /
º
C symbol will ash. Display will be lit and interior
light will function. Unit will not cool. Repeat command to
return to normal operation
DOOR ALERT NOTIFICATION
When the door is left open for more than 5 minutes:
• A tone will sound for several seconds every minute
• will appear in display
• Closed door to silence alert and reset
Operating Instructions
Loading ...
Loading ...
Loading ...