Loading ...
Loading ...
Loading ...
The essentials
Cruise control operating.
››› page
155
Main beam on or flasher on.
››› page
103
The natural gas engine coolant
temperature is too low.
››› page
192
Control lamps on the instrument panel
A passenger in the rear seats
has fastened their seatbelt.
››› page
52
A passenger in the rear seats
has not fastened their seat belt.
››› page
52
flashes quickly: the City Safety
Assist system function* brakes
automatically or has braked au-
tomatically. Or:
flashes slowly: City Safety Assist
function is not currently availa-
ble.
››› page
156
The City Safety Assist* function
has been connected manually. It
switches off after 5 seconds.
››› page
156
flashes: The City Safety Assist*
function has been manually dis-
connected.
››› page
156
after the ignition is switched on:
indication that the end of the
period for an inspection to be
performed is approaching.
››› page
90
it lights up: the Start-Stop sys-
tem is enabled. ALTERNATIVELY:
flashes: the Start-Stop system is
not available.
››› page
160
The Start-Stop system is ena-
bled but the engine cannot be
automatically stopped.
flashes in addition to the rest of
the segments of the fuel gauge:
Fuel tank almost empty.
››› page
183
WARNING
If the warning lamps are ignored, the vehicle
may
stall in traffic, or may cause accidents
and severe injuries.
●
Never ignore the warning lamps.
●
Stop the vehicle safely as soon as possible.
●
Park the vehicle away from traffic and en-
sure that there are no highly flammable ma-
terials under the vehicle that could come into
contact with the exhaust system (e.g. dry
grass, fuel).
●
A faulty vehicle represents a risk of acci-
dent for the driver and for other road users. If
necessary, switch on the hazard warning
lamps and put out the warning triangle to ad-
vise other drivers.
●
Before opening the bonnet, switch off the
engine and allow it to cool.
●
In any vehicle, the engine compartment is a
hazardous area and could cause severe inju-
ries ›››
page 187.
CAUTION
Failure to heed the warning lamps when they
appear m
ay result in faults in the vehicle.
Gearbox lever
Manual
gearbox
Fig. 35 Gear shift pattern of a 5-speed man-
ual
g
e
arbox
The position of each of the gears is shown on
the g
e
ar s
tick ››› Fig. 35.
●
Keep the clutch pedal pushed all the way
down.
●
Move the gearbox lever to the required po-
sition ›››
in Manual gear change on
p
ag
e 143
.
●
Release the clutch pedal to engage clutch.
26
Loading ...
Loading ...
Loading ...