Loading ...
Loading ...
Loading ...
Lights and visibility
there are no changes in brightness, and not,
for ex
ample when it is foggy.
“Coming home” and “Leaving home”
function (guid
ance lights)
The “Coming Home” and “Leaving Home”
function lights
up the vehicle’s immediate
proximity when getting into and out of it in
the dark.
The “Coming home” function is switched on
manually. However, the “Leaving home”
function is automatically controlled by a rain
and light sensor.
Activating the “Coming Home” function
●
Switch the ignition off.
●
Activates the headlight flasher for approx.
1 second ››
›
page 21.
When the driver door is opened, the “Coming
Home” lighting comes on. The delay in
switching off the headlights is counted from
when the last door or rear lid of the vehicle is
closed.
Deactivating the “Coming Home” function
●
It is automatically deactivated once the
time set for the light switch-off delay has
elapsed.
●
OR: it is automatically deactivated if, 30
seconds after the function has been activa-
ted, any vehicle door or the rear lid is still
open.
●
OR: turn the light switch to the position.
●
OR: switch on the ignition.
Activating the “Leaving Home” function
●
Unlock the vehicle (the light switch must be
at the position and the rain and light
sensor must detect darkness).
Deactivating the “Leaving Home” function
●
It is automatically deactivated once the
light switch-off delay time has elapsed.
●
OR: lock the vehicle.
●
OR: turn the light switch to the position.
●
OR: switch on the ignition.
Turn signal and main beam lever
Read the additional information carefully
›
›
›
page 21
Convenience turn signals
For the convenience turn signals, move the
lever as far as possible upwards or down-
wards and release the lever. The turn signal
will flash 3 times.
The convenience indicators can be deactiva-
ted at a Specialised workshop.
WARNING
Improper or lack of use of the turn signals, or
forg
etting to deactivate them can confuse
other road users. This could result in a seri-
ous accident.
●
Always give warning when you are going to
change lane, overtake or when turning, acti-
vating the turn signal in good time.
●
As soon as you have finished changing
lane, overtaking or turning, switch the turn
signal off.
WARNING
Incorrect use of the headlights may cause ac-
cidents
and serious injury, as the main beam
may distract or dazzle other drivers.
Note
●
If the con
venience turn signals are operat-
ing (three flashes) and the other convenience
turn signals are switched on, the active part
stops flashing and only flashes once in the
new part selected.
●
The turn signal only works when the igni-
tion is switched on. The hazard warning
lights also work when the ignition is switch-
ed off ››› page 70.
»
105
Technical dataAdviceOperationEmergenciesSafety
Loading ...
Loading ...
Loading ...