Loading ...
Loading ...
Loading ...
28
28 / EN
Cleaning the cavity ceiling
If the oven ceiling is dirty, the grill can be lowered
to make cleaning easier.
To avoid the danger of burning, wait until the grill
is cold before lowering it.
Proceed as follows:
1. Turn the grill support by 180º (1).
2. Lower the grill gently (2). Do not use excessive
force as this may cause damage.
3. After cleaning the ceiling, put the grill (2) back in
its place, carrying out the previous operation.
Important Warning!
The grill heating element support (1) may fall
when it is rotated. If this happens, insert the
grill heating element support (1) into the slot in
the ceiling of the cavity and rotate it 90º to the
grill heating element support (2) position.
Cleaning the accessories
Clean the accessories after each use. If they are
very dirty, soak them first of all and then use a
brush and sponge. The accessories can be
washed in a dish washing machine.
Make sure that the ceramic base is always clean.
4.6. Extraordinary maintenance
Occasionally, the oven will require minor servicing
procedures or the replacement of parts subject to
wear and tear, such as gaskets, light bulbs, etc.
The specific operations for each procedure of this
kind are provided below.
Before carrying out any operation
involving access to live parts,
disconnect the appliance from the
electricity supply.
Substitution of light bulb
If the light bulb needs substitution call the
Technical Assistance since it is necessary to
uninstall the oven to replace it.
4.7.What should I do if the oven doesn’t
work?
Warning!
Any type of repair must only be done by a
specialised technician. Any repair done by a
person not authorised by the manufacturer is
dangerous.
You do not need to contact Technical Assistance
to resolve the following questions:
The display is not showing! Check if:
The time indication has been switched off
(see section on Use).
Nothing happens when I press the keys! Check
if:
The Safety Block is active (see section on
Use).
The oven does not work! Check if:
The plug is correctly fitted in the socket.
The oven’s power is switched on.
The door is completely closed. The door
should close with an audible click.
There are any foreign bodies between the
door and the cavity front.
Cleaning and Maintenance
Loading ...
Loading ...