Loading ...
Loading ...
Loading ...
®
CAREANDCLEANING
CleaningandRemovableParts
Element
Reflector bowi Receptacle
TO REMOVE
1. Be sure the controls are in the off
position and the elements are cool
before attempting to remove them.
2. Grasp the element and lift slightly,
just enough to clear the drip bowl
and pull it straight out.
_ CAUTION: Do not lift
the_
element more than 1".
Lifting the element more
than 1" can damage the
receptacle, causing the element
not to lie flat when it is plugged
,,bbackin. , ,._
3. Lift out the drip bowl.
TO CLEAN THE DRIP BOWL
For brown food stains -- use
dishwashing detergent, warm water,
plastic scouring pads, mild abrasive
cleaners, soap-filled scouring pads
or ammonia.
Clean drip bowls after each use,
Rinse and dry well. Foods that are
not removed can cause permanent
stains that cannot be removed. For
heavily soiled bowls, place an
ammonia-soaked paper towel over
the bowl to loosen the soil, then
gently, scrub the bowl with a plastic
scounng pad.
For blue-gold heat stains -- use a
metal polish.
These stains are caused by
overheating, and are usually
permanent. To help minimize this
effect, avoid excessive use of high
heat settings and use flat bottom
pans that do not extend more than 1"
from the edge of the cooking element.
CAUTION: Do not
operate the cooktop
elements without the
drip bowls in place.
Scorching of the cooktop,
burning of wiring insulation and
_Joss of energy will occur. J
TO REPLACE THE UNIT:
1. Place the drip bowl into the
opening and make sure the
receptacle is visible.
2. Slide the element firmly back into
the receptacle and lower it onto
the drip bowl.
9
Loading ...
Loading ...
Loading ...