Loading ...
Loading ...
Loading ...
Faults and what to do about them. en
49
Odours in the washing
machine.
Run the Cottons 90 °C programme without laundry.
Add standard washing powder or a detergent that contains bleach.
Note: . To prevent foaming, only use half the amount of detergent
recommended by the detergent manufacturer.To prevent foaming, only use
half the amount of detergent recommended by the detergent manufacturer. Do
not use detergent designed for woollens or delicates.
Foam may also be leaking
from the detergent
drawer.
Have you used too much detergent?
Mix one tablespoon of fabric softener with 1/2 litre of water and pour it into
compartment II (not suitable for outdoor clothing, sportswear or items filled
with down)
Use less detergent in the next wash cycle.
Loud noises, vibrations
and machine "wandering"
during the spin and/or
drain cycles.
■ Is the appliance level? Level the appliance. ~ Page 18
■ Are the appliance's feet secured? Secure the appliance's feet.
~ Page 18
■ Have the transport locks been removed? Remove the transport locks.
~ Page 15
The display panel/
indicator lights do not
work while the appliance
is running.
■ Has there been a power failure?
■ Have the fuses blown/has the circuit breaker tripped? Switch on the
circuit breaker/replace the fuses.
■ If the fault occurs repeatedly, call our after-sales service.
There is detergent
residue on the laundry.
■ Some phosphate-free detergents contain water-insoluble residue.
■ Select Rinse or brush the laundry after washing.
The Õ symbol is lit in the
display panel when
paused.
■ The water level is too high. It is not possible to add laundry. Close the
washing machine door immediately, if necessary.
■ Press the A button to continue the programme.
The Õ symbol in the
display panel is off when
paused.
The door is unlocked. It is possible to add laundry.
TimeLight* (display on
the floor) will not light up.
*Depends on the model
■ Has Timelight been activated? ~ Page 40
■ Energy saving mode is active. ~ Page 12
■ Has there been a power failure?
If you cannot rectify a fault yourself (after switching the appliance off and on again) or a repair is required:
■ Switch off the appliance and pull the mains plug out of the socket.
■ Turn off the tap and our after-sales service.
Faults Cause/remedy
Loading ...
Loading ...
Loading ...