Loading ...
Loading ...
Loading ...
5
USING YOUR KETTLE
1. Put the stand on a stable, level surface. Wind excess cable beneath the
stand.
2. Plug the stand into the wall socket.
3. Put the kettle on the stand.
4. Move the switch to I. The light will come on and the kettle will start to
heat.
5. When it boils, the kettle will switch o.
6. To switch o manually, move the switch to O, or simply lift the kettle o
the stand.
GENERAL
When you lift the kettle, you may see moisture on the stand. Don’t worry, it’s
caused by the steam used to switch o the kettle which is allowed to escape
via vents underneath.
BOIL DRY PROTECTION
1. This will shorten the life of the element. A boil-dry cut-out will switch
the kettle o.
2. You must then remove the kettle from its stand to reset the cut-out.
3. Sit the kettle on the work surface till it’s cold.
CARE AND MAINTENANCE
• Unplug the stand, and let the kettle cool before cleaning.
• Wipe all surfaces with a clean damp cloth.
• Keep the connectors dry.
1. Remove the lid.
2. Squeeze the top of the lter to release it from inside the rim of the
kettle, then lift it out of the kettle.
3. Rinse the lter under a running tap while brushing with a soft brush.
4. Fit the bottom of the lter into the seam between the oor of the kettle
and the wall.
Loading ...
Loading ...
Loading ...