Loading ...
Loading ...
Loading ...
(269,1)
北米Model "A1747BE-B" EDITED: 2019/ 12/ 19
position and wait for at least 10 seconds.
2. After checking that the parking brake is
firmly set, turn the ignition switch to the
“START” position while depressing the
accelerator pedal slightly (approximately
a quarter of the full stroke).
3. If this fails to start the engine, turn the
ignition switch back to the “LOCK” position
and wait for at least 10 seconds.
4. Fully depress the accelerator pedal
and turn the ignition switch to the “START”
position.
If this fails to start the engine, try the
following procedure.
1. Turn the ignition switch again to the
“LOCK” position.
2. After waiting for 10 seconds or longer,
turn the ignition switch to the “START”
position without depressing the accelera-
tor pedal.
If the engine still does not start, contact
your nearest SUBARU dealer for assis-
tance.
! Stopping the engine
S07BD0802
The ignition switch should be turned off
only when the vehicle is stopped and the
engine is idling.
WARNING
Do not stop the engine when the
vehicle is moving. This will cause
loss of power to the power steering
and the brake booster, making steer-
ing and braking more difficult. It
could also result in accidental acti-
vation of the “LOCK” position on the
ignition switch, causing the steering
wheel to lock.
& Steering lock
S07BD16
After stopping the engine and the key is
removed from ignition switch, the steering
wheel will be locked due to the steering
lock function.
When the engine is restarted, the steering
lock will be automatically canceled.
! When the steering lock cannot be
released
S07BD1601
When you cannot unlock the steering
wheel, perform the following steps.
1. Check that the parking brake is ap-
plied.
2. Turn off unnecessary lights and acces-
sories.
3. Check that the select lever is set in the
“P” position.
4. Depress the brake pedal and keep it
depressed.
5. Turn the ignition switch to the “ON”
position while turning the steering wheel
left and right.
If you cannot unlock the steering wheel by
doing the steps, contact your nearest
SUBARU dealer.
& Models with push-button
start systems
S07BD09
! Safety precautions
S07BD0901
Refer to “Safety precautions” F2-7.
! Operating range for push-button
start system
S07BD0902
Refer to “Operating range” F3-6.
! Starting engine
S07BD0903
WARNING
If the indicator on the push-button
ignition switch flashes in green after
the engine has started, never drive
the vehicle. The steering is still
locked, and it may result in an
accident. In this case, press the
push-button ignition switch with
the brake pedal depressed and with
the steering wheel turned from the
right to the left.
– CONTINUED –
Starting and operating/Starting and stopping the engine
7-11
7
Loading ...
Loading ...
Loading ...