Loading ...
Loading ...
Loading ...
14
The door will
not close
properly.
The appliance is not properly leveled.
The door was reversed and not properly
re-installed.
The gasket is dirty.
The shelves are out of position.
Level the appliance with the
adjustable feet.
Check the door hinge and reassemble
correctly.
Clean the door gasket.
Check the shelves and refit correctly.
Display “E0”,
“E1”, “E2”,
“E3”, “E4”,
“E5” or “E7”.
“E0” indicates a communication error for
3-zone models.
“E1” or “E2” indicates that the air
temperature sensor has failed.
“E3” or “E4”indicates that the defrost
sensor in the evaporator has failed.
“E5” indicates a defrost heater failure.
“E7” indicates a door switch failure.
Call for service.
The alarm
sounds.
The appliance door has been open for
longer than 60 seconds.
Close the door.
The icon “--” is
lit and flashing
in the
temperature
display.
The display temperature is out of range.
Only temperatures within the range
0~99°F/-9~37°C can be displayed. If
the temperature is not within this
range, the icon “--” will be displayed
instead. This is normal.
If you've checked the table above and find that you still need help with your appliance, call our Customer
Service facility at 1-800-932-4267 between 9:00AM and 5:00PM ET. We will do our best to answer your
questions.
CALIFORNIA CARB/SNAP DISCLOSURE For products manufactured after January, 1, 2019:
Retail food refrigeration equipment manufactured after January 1, 2019, designed to store and display chilled
goods for commercial sale, and that use HFC-134a/R134a refrigerant are not for sale in California.
This product uses eco-friendly hydrocarbon refrigerant and fully complies with California CARB regulations.
However, we are required by California Law to provide the previous disclosure statement in every product sold in
California.
This product does not use any refrigerants on the “List of Prohibited Substances.”
Loading ...
Loading ...