Loading ...
Loading ...
Loading ...
Park on a level surface, activate the hazard
flashers and set the parking brake. Then,
place the transmission in park (P) and turn
the engine off.
Removing the Jack and Tools
Note: Pay close attention to the orientation
of the bag, because it will have to be
reinstalled after changing the tire.
1. Open the liftgate, then locate the
access panel on the floor behind the
third row seat. Unlatch and remove the
panel.
E208640
2. Remove the jack and tools assembly
tray from the compartment by turning
the wing-nut counterclockwise.
Remove the bag from the jack and
tools assembly tray by loosening the
strap.
3. Unsnap the wheel lug nut wrench, jack
extension and handle from the plastic
tray.
4. Remove the hack from the tray
assembly.
Removing the Spare Tire
1. Remove the jack handle and winch
extension from the tray and assemble
them.
2. Open the spare tire winch access plug
at the bottom of the compartment for
the jack and tools tray.
3. Insert the winch extension tool
assembly through the access hole in
the floor and engage the winch.
E208655
4. To remove the spare tire, turn the
handle counterclockwise until the tire
is lowered to the ground and the cable
is slightly slack.
5. Slide the retainer through the center of
the spare tire wheel and remove the
spare tire.
Jacking the Vehicle
Note: Jack at the specified locations to
avoid damaging your vehicle.
E208656
Front jacking point
300
Expedition (TB7) Canada/United States of America, enUSA, Edition date: 03/2016, First Printing
Wheels and Tires
Loading ...
Loading ...
Loading ...