Loading ...
Loading ...
Loading ...
Trouble Shooting
Fault Cause Solution
Light on, but motor does
not work
The leaf blocked
Get rid of the
blocking
The capacitor damaged Replace capacitor
The motor jammed bearing
damaged
Replace motor
The internal with of motor off or a
bad smell from the motor
Replace motor
Light does not work, motor
does not work
Beside the above mentioned, check the following:
Light damaged Replace lights
Power cord looses
Connect the wires as
per the electric
diagram
Oil leakage
One way valve and the air
ventilation entrance are not
tightly sealed
Take down the one
way valve and seal
with glue
Leakage from the connection
of U-shaped section and cover
Take U-shaped
section down and
seal with soap or paint
Shake of the body
The leaf damaged and causes
shaking
Replace the leaf
The motor is not tightly hanged Lock the motor tightly
The body is not tightly hanged Fixed the body tightly
Insufficient suction
The distance between the
body and the gas top too long
Readjust the distance
Too much ventilation from
open doors or windows
Choose a new place
and resemble the
machine
The machine inclines
The fixing screw not tight
enough
Tighten the hanging
screw and make it
horizontal
The hanging screw not tight
enough
Tighten the hanging
screw and make it
horizontal
Distributed by:
Home Appliances Pty. Ltd.
20 Carlotta Street, Artarmon NSW 2064
Tel: 02 9958 3111 Fax: 02 9958 3555 Customer Care: 1800 444 357
Email: info@hapl.com.au Website: www.hapl.com.au