Loading ...
Loading ...
Loading ...
Page 2 R60FS, R60FW, R90FS & R90FW Fixed Rangehood User Manual
Installation Instructions
Method one:
1. The cooker hood should be placed at a distance of 65-75cm from the cooking
surface for best effect. The Australian authority requirement is the distance from
the highest part of a gas cooktop is 600mm and electric cooktop is 650mm to the
bottom of the range hood
2. To install onto the wall, drill 4 holes of Ø 8mm at a suitable place according with
the centre distance of hole in the back of the cooker hood.
3. Insert the nut into the holes.
4. Insert the screws (ST4*30) into the nuts and tighten.
5. Put up the cooker hood onto the fixed screws.
6. Then use the attached accessories enclosed to turn the screws into the two holes
of inside the hood, and then fix the screws to tighten the hood onto the wall.
7. Put the one way valve onto the cooker hood.
60cm 90cm
Method two:
1. Drill 4 holes of Ø 6mm at the bottom of the hanging cupboard.
2. Put the one way valve on the cooker hood, then install the cooker hood on the
bottom of the cupboard, tighten the hood with enclosed 4 screws (M4*35).
3. Install the adjusted board on the bottom of the hood in order to keep out the
gap between hood back and cupboard.
Loading ...
Loading ...
Loading ...