Loading ...
Loading ...
Loading ...
04/3/22 CD-G10000V(Z)E4.fm
E-40
ENGLISH
TINSZA092AWZZ
4
CD-G10000V
CP-G10000
Tape Recording
" Recording from the radio
To interrupt recording:
Press the (TAPE-2 ) button.
To resume recording, press the same recording button you pressed
in step 5. Other buttons do not allow resuming.
To stop recording:
Press the ( /RETURN) button.
Note:
If you hear a whistling noise whilst recording an AM station, move
the AM loop aerial.
" Dubbing from tape to tape
You can record from TAPE 1 to TAPE 2.
To stop dubbing:
Press the ( /RETURN) button.
TAPE 1 and TAPE 2 will simultaneously stop.
" Erasing recorded tapes
Note:
Make sure that the TAPE 1 is not in use.
1 Tune in to the desired station (see page 32).
2 Load a cassette into the TAPE 2 cassette compartment
with side A facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
3 Press the button to choose one side or both sides.
... To record on both sides.
... To record on only one
side.
4 Press the (TAPE-2 ) but-
ton.
Recording will be paused.
5 Press the / ( SELECT/RESUME) button to record on
side A, or the [ (TAPE-2)] button for side B.
To record on both sides, begin with side A. (If recording is start-
ed from side B, the tape will not switch over to side A.)
1 Press the ON/STAND-BY button to turn the power on.
2 Load a prerecorded cassette into the TAPE 1 cassette com-
partment. Insert a blank tape into the TAPE 2 cassette com-
partment.
It is recommended that the recording tape is the same length as
the master tape.
3 Press the TAPE (1 2) button
until "TAPE 1" appears on the
display.
The reverse mode will be set to " ".
4 Press the (TAPE-2 ) button.
Recording will be paused.
5 Press the / ( SELECT/RESUME) button to start dub-
bing.
1 Load the tape to be erased into the TAPE 2 cassette compart-
ment with the side to be erased facing toward you.
2 Press the TAPE (1 2) button until "TAPE 2" appears on the dis-
play.
3 Set the button to " " to erase only one side and to " " to
erase both sides.
4 Press the (TAPE-2 ) button.
5 Press the / ( SELECT/RESUME) button to erase side A,
or the [ (TAPE-2)] button to erase side B.
To erase both sides, begin with side A. (If erasing is started from
side B, the tape will not switch over to side A.)
Downloaded from: http://www.usersmanualguide.com/
Loading ...
Loading ...
Loading ...