Loading ...
Loading ...
Loading ...
239If and when
– Once the bulb holder has been removed, press downwards in
the direction of the arrow
1
and at the same time, turn in the
direction of the arrow
2
⇒ Fig. 164.
Changing bulbs. LED lamps
Carry out the same operations as in lights fitted with bulbs.
If necessary, remove the socket, as if it were a bulb.
If the brake light and/or side light with LEDs have to be replaced, the tail
light must be replaced.
Side turn signal bulbs
Fig. 165 Side turn sig-
nals
– Press the turn signal to the left or to the right to remove the
bulb.
– Remove the bulb holder from the turn signal.
– Remove the failed bulb and replace with a new bulb.
– Insert the bulb holder in the turn signal guide until it clicks into
place.
– First fit the turn signal in the opening in the chassis, fastening
the tabs
1
⇒ Fig. 165, and then fit in the bulb as shown by the
arrow
2
⇒ Fig. 165.
Number plate light
– Insert the flat part of a screwdriver into the special slot and re-
move the bulb.
– Remove the bulb holder, by turning it until it is free.
– Change the bulb.
– Replace the bulb holder, by turning it until it fits fully.
– Fit the light into the space and press until you hear a “click”.
Safety First Operating Instructions Practical Tips Technical Specifications
Loading ...
Loading ...
Loading ...