PN-S655 User Manual

Loading ...

ENGLISH

Removing the Temporary Stand

Prepare wall-hanging brackets or a stand to mount the monitor unit. Read the manual for the brackets or stand for the proper

mounting procedure. (The screw holes for mounting brackets (M10 x 4 holes) are provided on the rear of the monitor.)

Caution

• Themonitorisheavy.Makesuretohandlethemonitorwithatleast2people.

• Thismonitorisxedtothetemporarystandwhenshippedfromthefactory.Pleasenotethatthisstandisfortemporaryuse

only until the monitor is properly mounted.

• Thetemporarystandisspecicallydesignedforthismonitor.Donotuseforotherdevices.

1. Hold the monitor with the handles to prevent it

fromfallingdown,andremovethestandxing

screws (4).

2. Lift the monitor by holding it with the handles and

the underside of the unit.

3. Whentheinstallationiscomplete,attachthe

included stand hole protection covers, using the

supplied screws.

(1) Fold the sheet perpendicularly with the

adhesive side inward.

(2) Remove the adhesive cover and attach the

sheet to the monitor.

Screws Screws

Loading ...

User Manual - Page 15