Loading ...
Loading ...
Loading ...
50
Instructions for the user
10. EXTRAORDINARY MAINTENANCE
The oven requires periodic minor maintenance or replacement of parts subject to wear, such as gaskets,
light bulbs, etc. Specific instructions for each operation of this kind are given below.
Before any intervention that requires access to live parts, disconnect the appliance from the
power supply.
WARNING: For your safety, you are advised to wear protective gloves while performing any
cleaning or extraordinary maintenance.
10.1 Removing the door
1. Open the door completely and
insert two pins into the holes on
the hinges indicated in the figure.
2. Grasp the door on both
sides with both hands, lift
it forming an angle of
around 30° and remove it.
3. To reassemble the door, put the
hinges in the relevant slots in the oven,
making sure that grooved sections A
are resting completely in the slots.
Lower the door and once it is in place
remove the pins from the holes in the
hinges.
10.2 Replacing the light bulb
If a light bulb needs to be replaced because it is worn or burnt out,
unscrew the bulb cover. Remove the bulb by unscrewing it and
then replace it with a similar bulb (25W).
10.3 Removing the door seal
To permit thorough cleaning of the oven, the door seal may be
removed.
There are fasteners on all four sides to attach it to the edge of the
oven. Pull the edges of the seal outwards to detach the fasteners. The
seal must be replaced when it loses elasticity and hardens.
Loading ...
Loading ...
Loading ...