User Manual - Page 193

For 2016.

Loading ...
Loading ...
Loading ...
iPod®* player (if so equipped)
Some characters used in other languages
(Chinese, Japanese, etc.) are not displayed
properly on the vehicle center screen. We
recommend using English or Spanish lan-
guage characters with an iPod®.
Large video podcast files cause slow re-
sponses in the iPod®. The vehicle center
display may momentarily black out, but it will
soon recover.
If the iPod® automatically selects large
video podcast files while in the shuffle mode,
the vehicle center display may momentarily
black out, but it will soon recover.
Improperly plugging in the iPod® may cause
a checkmark to be displayed on and off
(flickering). Always make sure that the
iPod® is connected properly.
The iPod® nano (2nd Generation) will con-
tinue to fast forward or rewind if it is discon-
nected during a seek operation.
An incorrect song title may appear when the
Play Mode is changed while using the iPod®
nano (2nd Generation).
Audiobooks may not play in the same order
as they appear on the iPod®.
The iPod® nano (1st Generation) may re-
main in fast forward or rewind mode if it is
connected during a seek operation. In this
case, please manually reset the iPod®.
If you are using an iPod® (3rd Generation
with Dock connector), do not use very long
names for the song title, album name or artist
name to prevent the iPod® from resetting
itself.
Be careful not to do the following, or the
cable could be damaged and a loss of func-
tion may occur:
Bend the cable excessively (1.6 in
(40 mm) radius maximum).
Twist the cable excessively (more than
180 degrees).
Pull or drop the cable.
Do not force the iPod® cable connector
into the device port.
Close the center console lid on the cable
or connectors.
Store objects with sharp edges in the
storage where the cable is stored.
Spill liquids on the cable and connectors.
Do not connect the cable to the iPod® if the
cable and/or connectors are wet. It may
damage the iPod®.
If the cable and connectors are exposed to
water, allow the cable and/or connectors to
dry completely before connecting the cable
to the iPod® (wait 24 hours for it to dry).
If the connector is exposed to fluids other
than water, evaporative residue may cause a
short between the connector pins. In this
case, replace the cable, otherwise damage
to the iPod® and a loss of function may
occur.
If the cable is damaged (insulation cut, con-
nectors cracked, contamination such as liq-
uids, dust, dirt, etc. in the connectors), do
not use the cable and contact a NISSAN
dealer to replace the cable with a new one.
When not in use for extended periods of
time, store the cable in a clean, dust free
environment at room temperature and with-
out direct sun exposure.
Do not use the cable for any other purposes
other than its intended use in the vehicle.
*iPod® is a trademark of Apple Inc., registered in
the U.S. and other countries.
4-40 Monitor, climate, audio, phone and voice recognition systems
Loading ...
Loading ...
Loading ...