Loading ...
Loading ...
Loading ...
15
WARNING: Risk of electric shock. Electrical wiring
must be done by qualifi ed personnel in accordance
with all applicable codes and standards. Before con-
necting wires, switch power off at service panel and
lock service disconnecting means to prevent power
from being switched on accidentally.
1. Connect House Power Cable to range hood wiring: BLACK
to BLACK, WHITE to WHITE and GREEN or bare wire
under GREEN ground screw.
2. Reinstall the blower cover plate (shaded part on illustration
beside) using the lock nut and7screws previously removed
in steps 3 and 6 on page 8. Pay attention to screw 1
location; from back of hood point of view, it must be
located on left side of the lock nut (see inset).
CONNECT THE WIRING
MOTORS
GROUND
WIRE
HOUSE
POWER
CABLE
GROUND
SCREW
Ducted Installation Only:
Re-install grease fi lters removed in step 1 on page 7, under
“Prepare the Hood”.
INSTALL THE FILTERS
c
d
e
1
2
3
45
6
7
BACK OF HOOD
LOCK NUT
1
3. Reinstall the fi llers by following steps as illustrated beside.
“Non-ducted Filters” available by calling
1-844-553-6667
Non-ducted Installation Only:
Purchase two non-ducted fi lters (see part number in Service
parts list). Attach the non-ducted fi lters following instructions
packed with the non-ducted fi lters.
Loading ...
Loading ...
Loading ...