Loading ...
Loading ...
Loading ...
6
7
DESCRIPTION
A ON/STANDBY button
B Lid release button
C Air purication lter
D Remote control
E Control panel
F Heating button
F1 Heating mode
G Temperature buttons
G1 Temperature indicator (C° and F°)
H ECO button
H1 ECO function
I Airow direction button
J Oscillation button
K Timer button
K1 Timer function
L Fan speed buttons
L1 Fan speed indicator
M Fan button
M1 Fan mode
N Hours
O Power indicator light
P Receiver for remote control
Increase button
Decrease button
Q Handle
R Air inlet
S Air outlet
OPERATION AND USE
Electrical connection
Before plugging the appliance into the outlet, check that
the power supply corresponds to the value indicated on the
rating plate and that the power supply is adequate for the
load.
Installation
The appliance can be used on any horizontal stable surface.
Do not overload the electrical circuit.
Avoid using the same socket for other appliances.
Please note: the appliance can be easily moved
carrying it by the handle. Before moving it remember to turn
it o.
Starting instructions
Please note: the lter is provided with a protective
wrapper around it that needs to be removed before rst use.
- Before turning on the appliance remove the lter from
its housing as explained in the lter maintenance
section.
- Remove the wrapper covering the lter (g.1).
g.1
- Replace the lter in its housing as explained in the lter
maintenance section.
- Connect the appliance to the power outlet.
- The appliance emits three beeps and the power
indicator light (O) also comes on and remains lit while
power to the appliance is on. The appliance goes into
STANDBY.
OPERATING MODES
Turn on the appliance
- Press/touch the ON/STANDBY button (A) to turn on the
appliance.
There are two buttons to select the operating modes of
the appliance: heating
(F) and fan (M).
- To turn o the appliance press/touch button ON/
STANDBY (A). If unit has been in heat mode , expect
the display to count down for about 10 seconds before
the unit shuts o. After that, to completely turn o the
appliance, remove the plug from the socket.
Please note: never turn o the appliance by only
pulling the plug. Press/touch the ON/STANDBY button (A) and
wait a few minutes before pulling the plug. In this manner,
the appliance can perform operating status checks.
Air purication
The product is designed to oer constant air purication
from allergens and pollutants. In heating and fan modes. The
purication function is NOT working when in the STANDBY
mode. If air purication is desired regardless of the need for
heating or ventilation, it is advisable to set the product in fan
mode using ventilation levels 1 through 5.
Heating mode
- To select this operating mode, press the heating button
(F) on the remote control. The display shows the
Loading ...
Loading ...
Loading ...