Loading ...
Loading ...
Loading ...
Door cannot be opened due
to water level or hot water
in the drum,or if the drum is
still moving,wait for it to stop
before attempting to open
the door.
Choose the best Detergent
Detergent
L
06
-
dloc
diuq
iL
40 - 90
---
---
P
Powder
o Optional
No-
Temperature range in °C
Universal
Cotton
ECO
Delicate
Express 15
Synthetic
Softener
Special
Delicate
Colour
-
-
-
-
-
-
-
-
-
-
L
L
L
L
O
O
O
O
O
L/P
L/P
L/P
L/P
L/P
L/P
Auto
1:25
19:30 Remaining delay end time Likely showing the delay end operation.
Lock
End
E2 Lock – error with door
Shut the door properly
E4
E8
F3
F4
F7 Motor - error.
FA
FCX
(X=1,2,)
Unb
Unbalanced load and not able
to spin.
20
21
Care and cleaning Troubleshooting
If using liquid detergent, it is not recommended to activate the delayed
start. Refer to the detergent manufacturers packaging for recommended
dosage!
info: Modern washing detergents at low temperatures.
Display code
Code Cause
Solution
Remaining wash cycle time.
Automatic load detection
End of cycle.
Water level not reached after
8 minutes.
Water protective level-error.
Temperature sensor-error.
Heating error (Appears at the
end of a cycle)
Water level sensor error.
Electronic control - error.
Wait for the program to end or cancel
the program and select the Spin
prog-
ramme,
In case there is still hot water in
the drum, to avoid scalding , select the
Rinse programme and leave it to wash
for several minutes then select the
Spin program.
This should allow the drum to cool down.
Check if water supply and water pressure
is normal.
Drain hose is self-syphoning.
Auto release. Otherwise contact the
af ter sales servi ce.
Contact the after sales servi ce.
Contact the after sales servi ce.
Contact the after sales servi ce.
Contact the after sales service.
Contact the a fter sales service.
Check and balance the laundry load in
the drum. Also reduce the load if too
heavy. Restart with a spin program.
Water inlet valve and inlet valve filter
Unplug the power cord and turn off the water
supply.
Unscrew the water inlet hose at the back of the
appliance as well as on the tap.
Remove the filters and flush them with water and a
brush.
Insert the filter and install the inlet hose.
To prevent blockage of water supply by solid substance
like lime clean regularly the inlet valve filter.
Laundry weight detection in process.
please wait until program cycle time is
displayed.
Drainage error, water not
emptied
Check drain hose for block
age, and
ensure it is installed properly.
Clean pump filter.
Loading ...
Loading ...