Loading ...
Loading ...
Loading ...
18 19
Care and cleaning Care and cleaning
Cleaning the detergent drawer
Clean the drawer from detergent residues regularly.
Pull out the drawer until it stops (1) and press the
release button (2) to remove the drawer. Then flush the
drawer with water until it is clean and insert the
drawer back in the appliance.
Cleaning the machine
Unplug the machine during cleaning and maintenance. Use a soft cloth with
soap liquid to clean the machine case and rubber components. Do not use
organic chemicals or corrosive solvents.
Cleaning the drum
Remove accidentally washed metal parts, such as pins, coins, etc. from the
drum because they cause rust stains and damage. Use a non-chloride cleaner
for removing rust stains. Observe the warning hints of the cleaning agent
manufacturer. Do not use any hard objects or steel wool for cleaning.
Cleaning the machine
If the appliance is left idle for a long period:
1. Pull out the power plug.
2. Turn off water supply.
3. Open the door to prevent formation of moisture and
odours. Let door open while not used.
4. To prevent drying out, do not le ave the dispenser
lids open for a long period of time.
5. Empty, clean and dry the detergent drawer.
Before next usage check carefully power cord, water
inlet and drain hose. Make sure everything is properly
installed and no leakage..
Pump filter
Clean the fil ter once a month and check the pump filter
immediately if the appliance:
doesn´t drain the water.
General information and tips:
Pump filter sealing has to be clean and unhurt. If the lid is
not full tightened, water will escape. The filter must be in
place, or it may lead to leakage.
Warning!
Scalding Risk! Water in the pump filter can be very
hot!Before and action please ensure water has cooled down.
1. Turn off and unplug the machine.
2. Open service flap at the right corner of appliance front.
3. Provide a flat container to catch leach water. There could
be bigg amounts!
4. Pull the drain hose out and hold its end above the
container .
5. Take the sealing plug out of the drain hose.
6. After complete drainage close d rainhose and push it
back into the machine.
7. Unscrew and remove counter clockwise the pump.
8. Remove contaminants and dirt.
9. Clean pump fil ter carefully.
10. Refix it thoroughly.
11. Close service flap.
Loading ...
Loading ...
Loading ...