Loading ...
Loading ...
Loading ...
31
HOW TO ADJUST THE REED SWITCH
If the console does not display correct feedback, the
reed switch should be adjusted. Before adjusting the
reed switch, unplug the power adapter.
Next, remove the
Seat Post Knob
(27), remove the
Knob Shield (9),
and slide the
Shield Cover (7)
upward.
Next, remove all of the Screws (not shown) from the
Right and Left Shields (10, 11).
See the lower drawing at the left. Carefully pull the
tops of the Shields (10, 11) apart and locate the Reed
Switch (57). Rotate the Left Crank Arm (20) until a
Magnet (55) is aligned with the Reed Switch. Then,
slightly loosen the #8 x 18mm Screw (34), slide the
Reed Switch slightly toward or away from the Magnet,
and then retighten the Screw.
Plug in the power adapter and rotate the Left Crank
Arm (20) for a moment. Repeat these actions until the
console displays correct feedback. When the reed
switch is correctly adjusted, reattach the parts that you
removed.
57
34
10, 11
55
20
7
9
27
Loading ...
Loading ...
Loading ...