Loading ...
Loading ...
Loading ...
User instructions
13
CANCELLING A
PROGRAM IN PROGRESS
• Open the door, taking care to avoid splashes of water, and hold
down the PROGRAM SELECTION (3) button for a few seconds
until the indicator lights for programs 4 and 5 illuminate
simultaneously (marked "end").
• Close the door.
• After approximately 1 minute the dishwasher will advance to the end
of cycle.
CHANGING THE PROGRAM
To change the program in progress, simply open the door and select a
new program. When the door is closed the dishwasher will automatically
select the new program.
TO SAVE ON ENERGY!…AND PROTECT THE ENVIRONMENT
• Always use the dishwasher with a full load.
• Do not wash the dishes in running water.
• Use the washing program that is most appropriate for each type of
load.
• Do not carry out any preliminary rinsing.
• If available, connect the dishwasher to a hot water supply up to
60°C.
TO REDUCE DETERGENT CONSUMPTION AND PROTECT THE
ENVIRONMENT
The phosphates contained in dishwasher detergents are harmful to the
environment. To avoid using excessive amounts of detergent save on
electricity as well, observe the following recommendations:
• Sort your dishes, washing delicate items separately from those
more resistant to strong detergents and high temperatures.
• Do not pour detergent directly onto dishes.
If the door must be opened while a wash cycle is in progress, the
program will be interrupted. The corresponding light will continue to flash
and a beeper will signal that the cycle has not been completed. You
must wait about 1 minute before closing the door to restart the program.
When the door is closed the program will continue from where it was
interrupted. This operation should only be carried out if strictly
necessary, as it could cause problems in running the program.
Loading ...
Loading ...
Loading ...