Loading ...
Loading ...
Loading ...
User instructions
9
NOTES AND REFERENCES
Only
run the soak program with partial loads.
The options cannot be used with the soak program.
The ENERSAVE option (if featured) cannot be used with soak, ultra clean, or any
programs which do not include the final drying stage.
*
Standard program under
EN 50242
. The
ENERSAVE
option (if featured) must
be enabled.
** See information sheet provided
(1) Program consumption and duration figures have been measured in
accordance with the EN 50242 standard. Values may vary depending on
water supply and ambient temperatures and the type and quantity of dishes
loaded.
(2) 1 or 2 cold rinses depending on the model.
REFERENCES for the ENERGY LABEL supplied with the dishwasher:
- Annual energy consumption is based on 280 standard wash cycles with cold
water using low-energy operating modes. Actual figures will depend on the
way in which the appliance is used.
- Water consumption is based on 280 standard wash cycles. Actual figures
will depend on the way in which the appliance is used.
- Information refers to the EN 50242 STANDARD program (identified in the
programs table), which is the most efficient in terms of combined energy and
water consumption. The program is recommended for dishes with a normal
level of dirt.
- Drying efficiency class on a scale from “G” (minimum efficiency) to “A”
(maximum efficiency).
Loading ...
Loading ...
Loading ...