Loading ...
Loading ...
Loading ...
- 05 -
To power on, insert the car charger into your car’s 12V socket, then connect the included
cable to the car charger and to the Mini USB port of the DR02. Insert a Micro SD Card
into the Micro SD card slot and format it using the ‘Format’ option in Dash Camera ‘Setup.’
After powering on each time, the system will start recording automatically. To power off,
disconnect the Mini USB cable.
Video Recording
● Loop Recording: Recording will begin automatically after powering on with a Micro
SD Card in the device. Each recorded file is up to ten minutes long, with old footage
being replaced when Micro SD Card storage is full.
● Motion Detection Recording: Switch on motion detection in ‘Setup.’ This function will
start recording video when the dash camera detects motion in front and stop recording
when motion is no longer detected.
● Time-Lapse Recording: Switch on time-lapse recording in ‘Setup.’ This function will
capture a picture per second to make a video played at 30fps.
Emergency Recording
● Manual File Backup
Press to back up the current file so that it will not be overwritten. A icon will
appear in the top left of the LCD screen to indicate a protected emergency
recording is in progress.
● Auto File Backup
Once the G-sensor is activated by a sudden impact, the device will automatically
make a recording and protect it from being overwritten. Adjust G-sensor sensitivity in
the ‘Setup’ menu.
Snapshot
● Hold down for 3 seconds to take a snapshot while in recording mode
● The snapshot files are located in the \AUKEY\PHOTO folder on the Micro SD Card
● The icon will be shown after you take a snapshot. This will not interrupt the video
recording
Audio Recording
Turn on/off audio recording by long-pressing when in recording mode (or by
adjusting in ‘Setup’ menu). When audio recording is on, in-car audio will be recorded
during video recording. Voicing details of possible hazards that may develop,
especially when off-camera, may provide useful information. You can even use it to
record car license plate numbers that may not be captured on the video.
USB File Transfer
1. Connect the Dash Cam (with card inside) to your computer using your own USB
mini-B data cable (the included cable is for power only). It should be recognized as a
removable device (with a USB connector image displayed on-screen).
2. Find the video recording files located in the \AUKEY\MOVIE folder (or\AUKEY\PHOTO
for snapshots).
3. Copy the files to your computer.
Micro SD Card File Transfer
1. Shut down the device (by disconnecting the power cable) and eject the Micro SD Card.
2. Insert the Micro SD Card into a computer Micro SD card slot or reader and your computer
will automatically detect the Micro SD Card.
3. Find the video recording files located in the \AUKEY\MOVIE folder (or \AUKEY\PHOTO for
snapshots).
4. Copy the files to your computer.
Viewing Photos and Videos
1. Press to enter the playlist.
2. View photos or videos by choosing either ‘Photo File’ or ‘Video File’.
3. Select the file you want to view and press .
4. For videos, press again to begin playback.
Deleting and Locking/Unlocking Photos and Videos
● Press to delete or to lock/unlock a photo or video file after selecting
it from the playlist. If a video is being played, press to stop it and then press
to delete or to lock/unlock
● Once deleted, photos and videos cannot be recovered
● If you lock a photo or video, it will be protected and not overwritten
Product Care
● Ensure camera and mount are firmly fixed in-place before use to avoid falls
● Keep away from liquids, extreme heat, and strong magnetic fields
● Ensure the operating temperature is within the range: -30°C - 75°C (-22°F - 167°F)
● Avoid touching the lens surface. It may be cleaned with a cotton swab or lens cleaning
paper. If any dirt is difficult to remove, a non-abrasive glasses lens cleaner may be
used. Do not use corrosive solutions
Warranty & Customer Support
For questions, support, or warranty claims, please contact us at the address below that
corresponds with your region. Please include your Amazon order number and product
model number.
Amazon US orders: support.[email protected]
Amazon EU orders: support.[email protected]
Amazon CA orders: support.[email protected]
Amazon JP orders: support.[email protected]
*Please note, AUKEY can only provide after sales service for products purchased directly from AUKEY. If you
have purchased from a different seller, please contact them directly for service or warranty issues.
Loading ...
Loading ...
Loading ...