Loading ...
Loading ...
Loading ...
49-60813
10
INSTALLATION INSTRUCTIONS
INSTALL CASTERS
Depending on your model, the freezer comes with either 4 or 6 casters
(packaged with a screwdriver and screws [1 per caster] inside the freezer).
1. Open the freezer lid, remove the baskets, casters, screwdriver and other
accessories.
2. Using two or more people, gently lay the freezer onto its back.
NOTE: The casters with locks should be installed on the front corners of
the freezer.
3. Orient each caster so that the hole in the
caster mounting plate will align with the hole
located in each corner of the cabinet bottom.
NOTES:
• Make sure the casters with locks are installed
on the front of the freezer.
• Freezer models with 6 casters - Install a caster to each of the four
corners, and also install a caster in the center front and center back of
the freezer.
4. Slide each caster into the caster brackets until the holes align.
NOTES:
• Each caster will slide into the corner brackets from a different direction.
• It may be necessary to lift the bottom of the freezer slightly to insert
the rear casters into their brackets.
5. Using one screw per caster, fasten
the caster to the freezer bottom.
Repeat for the remaining casters.
6. Using the screwdriver (provided),
completely tighten the screws.
7. Using two or more people, gently
lift the freezer to an upright
position.
8. Move the freezer to its final
location, and then lock the casters
(step on each front caster lock) to keep the freezer from rolling.
WARNING
EXCESSIVE WEIGHT HAZARD
Use two or more people to move and install freezer.
Failure to do so can result in back or other injury.
Caster
Lock
Caster
Hole
Brackets
Freezer Bottom
ENGLISH
Loading ...
Loading ...
Loading ...