Loading ...
Loading ...
Loading ...
HOW TO USE THE BUILT-IN TIMER
■Timer playback
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD, TUNER (BAND), TAPE (1
V
2) or VIDEO/AUX
button to select the desired function, and then adjust the
sound volume using the VOLUME buttons.
3 Press the TIMER/SLEEP button repeatedly until a white "
f
"
is displayed.
● The timer set indicator will flash.
4 Press the TUNING/TIME (
X
or
W
) button to set the hour start
time, then press the MEMORY/SET button.
5 Press the TUNING/TIME (
X
or
W
) button to set the minute
start time, then press the MEMORY/SET button.
● The unit will enter the stand-by mode automatically, and the
timer set indicator will light up.
6 When the preset time is reached, the timer playback will start.
● The volume will increase gradually.
7 If you select CD or TAPE, the unit will enter the stand-by
mode after the playback. If you select TUNER or VIDEO/AUX,
it will enter the stand-by mode one hour after the timer play-
back starts.
Note:
● When performing timer playback using an external unit con-
nected to the VIDEO/AUX socket, only the power of the main
unit will be turned off automatically. (The power of the external
unit will not be turned off.)
■Timer recording
1 Press the ON/STAND-BY button to turn the power on.
● Load a cassette for recording into the TAPE 2 cassette com-
partment.
● Load the tape with the side to be recorded facing you.
2 Press the TUNER (BAND) or VIDEO/AUX button to select the
desired function, and then adjust the sound volume using the
VOLUME buttons.
3 Press the TIMER/SLEEP button repeatedly until a red "
f
" is
displayed.
● The timer set indicator will flash.
4 Press the TUNING/TIME (
X
or
W
) button to set the hour start
time, then press the MEMORY/SET button.
5 Press the TUNING/TIME (
X
or
W
) button to set the minute
start time, then press the MEMORY/SET button.
● The unit will enter the stand-by mode automatically, and the
timer set indicator will light up.
6 When the preset time is reached, the timer recording will start.
● The volume will increase gradually.
7 When the recording tape reaches its end, the timer recording
will end, and the unit will enter the stand-by mode.
To cancel timer operation:
Press the ON/STAND-BY button to turn the power on.
To change the programmed contents:
Start again from step 1.
Note:
● Once the time is set, the setting will be retained until a new
time is entered.
TIMER/
SLEEP Timer set indicator
ON/
STAND-BY
MEMORY/
SET
VOLUME
TUNING/
TIME
( )
CD
TUNER
(BAND)
VIDEO/
AUX
TAPE
(1 2)
3
4
5
● Before setting the timer, make sure that the clock
setting is correct. (Page 11)
(Main unit operation)
TIMER/
SLEEP Timer set indicator
ON/
STAND-BY
MEMORY/
SET
TUNING/
TIME
( )
TUNER
(BAND)
VIDEO/
AUX
VOLUME
3
4
5
(Main unit operation)
E-21
Loading ...
Loading ...
Loading ...