Loading ...
Loading ...
Loading ...
COMPACT DISC OPERATION
■CD playback
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD button.
3 Press the OPEN/CLOSE button to open the disc tray.
4 Place the CD(s) on the disc tray, label side up.
● CDs can be placed on any open position on the disc tray.
● Be sure to place 8 cm (3") CD(s) in the middle of the disc
trays.
Caution:
Do not stack CDs in the tray.
This can damage the player and the CDs.
5 When loading a third disc, press the DISC SKIP button to turn
the disc tray, then place the CD in the open position.
6 Press the OPEN/CLOSE button to close the disc tray.
● The total number of tracks and the total playing time for one
disc will be displayed. At this time, the disc number indicator
is flashing.
7 Press the DISC SKIP button to select the desired disc number.
8 Press the
0
(
0R
) button.
● Playback will begin from track 1 on the disc you have selected
to play.
● After the disc finishes playing, the next disc will automatically
play.
● When there is no CD in one of the disc 1 - 3 positions, that
position will be skipped and the next CD will be played.
● When the last track on the third disc has finished playing, the
unit will stop automatically.
To interrupt playback:
①Press the
6
button on the remote control.
● "
6
" will appear.
②Press the
0R
button to resume playback from the same
point.
To stop playback:
Press the ■ button.
To remove the CDs:
Whilst in the stop mode, press the OPEN/CLOSE button.
● The disc tray will open. Remove the two discs. Then, press
the DISC SKIP button to rotate the disc tray and remove the
remaining disc.
After use:
Press the ON/STAND-BY button to enter the stand-by mode.
Caution:
● Do not carry the unit with discs left in the disc
trays. The discs may come loose inside the
unit and they may be damaged or cause dam-
age to the unit. This may also cause malfunc-
tions.
● Do not place two CDs in one disc position.
● Do not push the disc tray whilst it is moving.
● Do not attempt to turn the disc tray by hand. This
may cause malfunctions.
● If the power fails whilst the tray is open, wait until
the power is restored.
● If the disc tray is stopped forcibly, "ERR" will ap-
pear in the display and the unit will not function.
If this occurs, press the ON/STAND-BY button to
enter the stand-by mode and then turn the power
on again.
● If TV or radio interference occurs during CD oper-
ation, move the unit away from the TV or radio.
● If a disc is damaged, dirty, or loaded upside down,
the disc will be skipped and the next disc will auto-
matically play.
45
1
2
3,6
5,7
8
5,7
8
2
1
12 cm (5")
8 cm (3")
E-13
Loading ...
Loading ...
Loading ...