Richmond 6G40-36F3 Questions & Answers
You can find answers or submit your question.
In ManualsFile, you can ask and answer questions about your issues. We - volunteers - or other people who own the product will help you.
You should also read the documentation for your own answers. Download documentation for this product here.
what is the Qualified manufacturer code for this model
I need to replace thermocouple on richmond essential gas water heater model 6G40-36F3, serial# Q071707624. It's around 8yrs old. I need to make sure I get the correct thermocouple replacement. Please advise. Thank you
Our water has become completely rusty since installing new Richmond water heater. Would like to remove anode rod is that a problem. We’ve done that previously with others
what is the pn for the thermocouple?
You can read & refer to "Not enough or no hot water" at this below link: https://manualsfile.com/product/pmbfwyue29.html#:~:text=Not%20enough%20or%20no%20hot%20water
I have the water heater just like this picture. When I change the thermocouple and take the two wire off and one of them is make by aluminum and broken. So the ignitor won't stay lit. How can I do? please help me
What are the two white wires going to thermocouple connect
What are the two white wires going to thermocouple connect
What are the two white wires going to thermocouple connect
What are the two white wires that go to thermostat
What is the part number for the control thermostat
The gas control valve # is on the side of it. Mine is AP15255D which is no longer being made because of problems with it. The new replacement is SP20303D also was told SP20303DT. Nothing like buying a product made by Rheem and getting reamed.
I need to replace the control thermostat I want to make sure I order the right one?
Is model 6G40-36F3 for mobile home use
How do you get into the chamber to change the thermocoupler? It seems sealed & I don't want to break anything
My water heater will stay lit for a moment then turn off. We bought it 6 months ago.
I'm having the same issue. I'm assuming it's the thermocouple. I'd like to change it. I have everything, including the 3 lines disconnected. Now I can't seem to get into the chamber. It seems sealed. I'm afraid to break something if I force it open. Have you gotten yours fixed?
Submit your question
If you have any questions about this product, please ask here.
