Chef CFG503WBNG Questions & Answers
You can find answers or submit your question.
In ManualsFile, you can ask and answer questions about your issues. We - volunteers - or other people who own the product will help you.
You should also read the documentation for your own answers. Download documentation for this product here.
How too remove oven door
To remove the oven door:
- With door fully open, rotate the two stirrups to its rest position (to engage the stirrups).
- Close the door until it stops against the stirrups.
- Close the door further.
- Lift the door slightly and evenly while continuing to slowly close the door.
- Remove the door by lowering gently and pull away from the frame of the oven. Care should be taken not to damage kick panel and other parts of the cooker.
You can see details in the link below: https://manualsfile.com/product/pkm7vn5vud.html#:~:text=Procedure%20to%20remove%20the%20door
CFG503WBLP What sort of regulator connecting? Regulator type please Thanks
Use AS/NZS 5601 to ensure adequate gas supply.
Where to connect the power ignition for the top gas rings
were does the manufacturer recommend installing gas regulator
It is recommended to fit the regulator to the appliance connection point, then fit either hard piping or a high-level flexible connection (AS/NZS 5601.1) which is then attached to the consumer hard piping.
where does the plate go to stop tilting
Position anti-tilt plate to the rear wall and 25mm from side of cupboard. Securely fix anti-tilt plate to the floor with fasteners. Adjust levelling feet on cooker as required.
Submit your question
If you have any questions about this product, please ask here.
