GE - General Electric JVM3160DFWW Questions & Answers
You can find answers or submit your question.
In ManualsFile, you can ask and answer questions about your issues. We - volunteers - or other people who own the product will help you.
You should also read the documentation for your own answers. Download documentation for this product here.
15 Questions
I have no power in the microwave power to outlet is fine. no breaker problem. where is the fuse in microwave if there is one. thanks
To provide an accurate diagnosis, a qualified service technician is required. Please contact GE Appliance Service at 1-800-432-2737 for assistance.
Microwave has power and comes in for a cooking cycle but does not heat up food.What can the problem be and how can I correct the problem?
If the microwave runs but is not heating, it could be one of many components. Make sure the “Timer” function was not inadvertently used. Check to ensure the door is closed firmly. Close it firmly, but do not slam. This confirms the engagement of the door's safety mechanisms. Reset the electronics by unplugging or turning off power at the circuit breaker for 30 seconds or so. If the above suggestions do not solve the problem and the microwave still won't heat, we recommend contacting service.
No beeps where there should be
We suggest to reset the electronics by unplugging or turning off power at the circuit breaker for at least 30 seconds.
No beeps when operating, no beep when done heating, no beeps at all.
If it does not beep when the programming, reset the electronics by unplugging or by turning off power at the circuit breaker for 30 seconds or so.
The sound on the microwave does work. Brand new. Was real quiet now no sound on timer etc
The first thing that would be best to try is an electronic reset. This can be done by removing the power cord for about 30 seconds and then plugging it back in. You can also reset the power at the breaker for the same amount of time. If this doesn't help then contact customer service.
no lights on microwave electric outlet good how do I get to the fusenin microwave
The fuse is located under the plastic grill at the top of the microwave. It's held on by two screws.
How many light bulbs do you need? In our previous m’wave, it took 2 bulbs. The new one seems to have only one. Can you help me? Our new microwave didn’t have the direction manual.
This microwave has a total of 3 bulbs. There are two bulbs used for the surface lighting and one bulb used for the interior lighting. You can find the User Manual at: https://manualsfile.com/download/o7nex5tbx.html We hope that's useful information!
User manual, where is it?
You can download the User Manual at: https://manualsfile.com/download/o7nex5tbx.html
Beeper does not function much of the time
The first thing that would be best to try is an electronic reset. This can be done by removing the power cord for about 30 seconds and then plugging it back in. You can also reset the power at the breaker for the same amount of time. If this doesn't help then contact customer service.
When operating the microwave, does the word “vent” always appear on the display as the time counts down, or is this an indication that something is wrong with the venting?
Where is the user manual
You can download the User Manual at: https://manualsfile.com/download/o7nex5tbx.html
Microwave does not function and has no lights on the control panel. Electricity to the outlet is good. Is there a fuse in the oven I can check? If so, where is it located?
Microwaves do have a fuse in them and can be checked and changed if blown. Just make sure the microwave is disconnected from the power source and that the fuse is pulled before checking it with a ohm meter for continuity. If you try checking the fuse while it is still in the fuse holder it may very well false read good because of back feeding through circuits.
Installed this model this year and all the beeps seem to have stopped. When you press a button, no beeps, when a cycle stops, no beeps. Is there a reset for this?
Installed this model this year and all the beeps seem to have stopped. When you press a button, no beeps, when a cycle stops, no beeps. Is there a reset for this?
1 likeWe suggest to reset the electronics by unplugging or turning off power at the circuit breaker for at least 30 seconds.
Can this microwave be mounted over a GE gas stove? It will be 15” above the stove.
Ask a Question about GE - General Electric JVM3160DFWW
If you have any questions about this product, please ask here.
