You can find answers or submit your question.
In ManualsFile, you can ask and answer questions about your issues. We - volunteers - or other people who own the product will help you.
You should also read the documentation for your own answers. Download documentation for this product here.
How do I extend telescopic tube to be longer
I have an aucma EV-619 vacuum cleaner but not a whall model. My brush does not revolve and I cannot remove the brush as the switch only refers to the Whall model. There are 3 screws on the base. Do I remove these screws or is there another solution. The suction still works but I cannot find an aucma vacuum repair company near Sutton, Surrey. I have tried to remove all hairs on the brush.
You can refer to the video and toggle the small black piece to pop out the organ and take out the roller brush afterwards.
https://images-na.ssl-images-amazon.com/images/I/91DQbYEXO0S.mp4
How do I remove the brush to clean? The manual says there is a button; but there is no button on my model
Are you sure your model is Whall EV-691? If correct, please read in the CLEAN THE ELECTRIC FLOOR NOZZLE section to remove the brush to clean: https://manualsfile.com/product/k2y8b5y54nv.html?page=11
I have an aucma vacuum cleaner EV-619 but not a whall vacuum cleaner and my brush roller does not revolve. I cannot remove the roller as I can't find a switch which removes the brush head. There are 3 screws . Do I undo these three screws or is there another way. I cannot find a company in Sutton, Surrey who repairs these models.
Where can I purchase a replacement dust cup for my Niceboy cordless vacuum, model EV-691R?
In this case, please contact the manufacturer.
I can’t get my vacuum to stay on. I’ve tried 2 new batteries and the machine stays on for about 20 seconds and goes off. There is no suction and the only power that is on is low, but without suctions.
Suction power is low or nonexistent. The reason may be:
Same thing happened to me. I was able to resolve the problem by taking the main part of the unit apart (several screws) and reconnecting what presume to be the control cable, which has become disconnected internally. No soldering, just clicked the connector back into place then reassembled the unit.
If you have any questions about this product, please ask here.