Whirlpool WRS315SDHZ05 Questions & Answers
You can find answers or submit your question.
In ManualsFile, you can ask and answer questions about your issues. We - volunteers - or other people who own the product will help you.
You should also read the documentation for your own answers. Download documentation for this product here.
How do I reset the water filter light on this refrigerator?
After changing the water filter, reset the status light.
- Press the Options button to enter Options mode, press Lock to initiate the reset, and then press Measured Fill to confirm that you want to reset the status light.
- Press and hold the Filter button for 3 seconds to reset the status light.
- The reset button is located on the control panel in the refrigerator compartment. To reset the status light after changing the filter, press Temp Setting within 3 seconds. The status light will change from red to off when the system is reset.
- Reset the filter status light by pressing and hold Light and Ice Type buttons for 3 seconds.
The light bulb is out in the freezer, how do I change it
To replace the light bulb:
- Unplug refrigerator or disconnect power.
- Remove light cover.
- Remove light bulb and replace with one of the same size, shape and wattage, recommended by Whirlpool.
- Reinstall light cover.
- Plug in refrigerator or reconnect power.
NOTE: Not all appliance bulbs will fit your refrigerator. Be sure to replace the bulb with one of the same size and shape. On some models, the interior lights require a 40 W bulb max.
The panel inside the refrigerator- which lights should be on to get maximum cooling for refrigerator and freezer
Submit your question
If you have any questions about this product, please ask here.
