GE - General Electric GTW465ASNWW Questions & Answers
You can find answers or submit your question.
In ManualsFile, you can ask and answer questions about your issues. We - volunteers - or other people who own the product will help you.
You should also read the documentation for your own answers. Download documentation for this product here.
12 Questions
Why does the machine not fill with cold water only? Only fill when both cold and hot water is selected, does hose placement play a factor?
This washer has a built-in temperature management system. On this model, if you choose "Cold" water and your incoming water supply is very cold, the washer may add a bit of hot water to elevate the overall temperature of the water in the tub to an acceptable cold temperature. If the you prefer a true cold water fill, select Tap Cold. When Tap Cold is selected, the temperature of the water coming into the washer will be the same temperature that's coming into the house. The temperature of this water will vary based on where you live and how cold the water supply is.
Can I disconnect the lid lock.
You are not able to disconnect the lid lock feature on your washer as this is a safety mechanism designed to ensure nobody is hurt while the washer is in operation.
Do I have to keep the lid up after every wash?
Yes, the lid can also be left open after washing to allow moisture to evaporate.
How can I cancel and turn off the washer
when I accidentally pushed the start button.You are always welcome to cancel the wash mid-cycle by pressing and holding the "Start/Pause" button for three seconds. This will also allow you to start a new cycle at any point.
how do i get to the drain pump filter
The Fine Mesh filters were removed from under the agitator when it was found that a better pump and larger holes in the hub under the agitator did a better job of removing lint and preventing clogs in the drain system. The drain system allows water to flow through the basket and out the bottom of the tub pulling lint, hair and small particles with the water. There is no maintenance required on this system, so there is not a way to access the pump for cleaning or maintenance.
How do I use the precise fill option
The Precise Fill allows the washer to determine the optimum water required to wash items in the basket. The tub needs to have the clothes inside in order for it to work properly. For additional details, please see the following link: https://manualsfile.com/product/ckrgvc3nz.html#:~:text=Precise%20Fill%20(on%20some%20models)
Lint on clothes. Does filter need to be cleaned? Where is it? This was a problem with my previous washer that did not have a filter. Any suggestions?
This model washer does not have a filter in the machine. The only filter associated with this washer is the pump water filter.
Washer don't seem to go through all the cycles...how can I start it back to normal...does it need to be repgrammed?
We recommend unplugging the unit and letting it sit for 10 minutes. Plug unit back in and select cycle desired. If unit is still not functioning as it should, please contact a GE Appliances technician by calling 1-800-432-2737
Washer don't seem to go through all the cycles...how can I start it back to normal...does it need to be repgrammed?
We recommend unplugging the unit and letting it sit for 10 minutes. Plug unit back in and select cycle desired. If unit is still not functioning as it should, please contact a GE Appliances technician by calling 1-800-432-2737
I can’t get the washer to run a cycle and the lid doesn’t lock how can I fix it ?
When & where to add bleach
Liquid chlorine bleach should be added through the bleach dispenser in the front left corner. You can find this information at the link: https://manualsfile.com/product/ckrgvc3nz.html#:~:text=Deep%20Rinse%20option.-,Liquid%20Bleach,-Liquid%20chlorine%20bleach
Ask a Question about GE - General Electric GTW465ASNWW
If you have any questions about this product, please ask here.
