GE - General Electric GDT695SMJ2ES Questions & Answers
You can find answers or submit your question.
In ManualsFile, you can ask and answer questions about your issues. We - volunteers - or other people who own the product will help you.
You should also read the documentation for your own answers. Download documentation for this product here.
4 Questions
How to fix below problem... - control panel lights are all off. They are not responding to any touch. No lights. - Model # GDT695SMJ2ES - machine is definitely getting power
Make sure the dishwasher door is closed tightly and is latched correctly. You can also try resetting your home's fuse or circuit breaker for the dishwasher. If your dishwasher is controlled by a wall switch, make sure the power is turned on. If the problem persists, please contact GE Appliances technician that will be able to accurately diagnose and repair your appliance.
Lights not on
Make sure the dishwasher door is latched tightly. Open the door and then close it again firmly. Also, if the dishwasher is controlled by a wall switch, make sure the power is turned on. Wall switches are required in some areas, so check around the kitchen counter or in the cabinet under the sink for a switch you do not normally use. See the following troubleshooting link for more tips: http://products.geappliances.com/appliance/gea-support-search-content?contentId=17396 We hope this is helpful.
Lights are not on. Circuit breaker is on.
I removed the filter of an empty dishwasher and cleaned it. I noticed when I remove the filter that there is still water standing in the bottom where the filter was with gunkiness in it. Can I run a cycle of the empty dishwasher without putting the filter back on to clear out what is in that bottom section where the filter was?
Ask a Question about GE - General Electric GDT695SMJ2ES
If you have any questions about this product, please ask here.
