Whirlpool WRF535SWHZ Questions & Answers
You can find answers or submit your question.
In ManualsFile, you can ask and answer questions about your issues. We - volunteers - or other people who own the product will help you.
You should also read the documentation for your own answers. Download documentation for this product here.
How to connect the back panel water lines
You can see the "Connect to Water Line" on page 3 of Installation Instructions: https://manualsfile.com/download/29yjahywm/3.html
The water line may come down from the top or up from the bottom. The water dispenser will use the same line. The gray water tubing on the back of the refrigerator (which is used to connect to the household water line) is a PEX (cross-linked polyethylene) tube. Copper and PEX tubing connections from the household water line to the refrigerator are acceptable, and will help avoid off-taste or odor in your ice or water. Check for leaks. If PEX tubing is used instead of copper, we recommend the following part numbers: W10505928RP or W10267701RP.
The back of the frig has four pex lines. I do not see info on connecting to these lines. Two of the lines are together at the upper left , these are 5/16 inch. Another is on the right side about half way up. This is 5/16. The fourth person line is 1/4 inch and it points down. Thx
Only the gray 1/4-inch PEX line that points downward is meant for connecting to your household water supply. The other PEX lines (5/16-inch in size) are for internal use (like the dispenser and ice maker), so don’t connect to those. Use a ¼-inch compression fitting with PEX or copper tubing, check for leaks, and flush the system once it’s hooked up.
What is the right temperature settings freezer and refrig for this model
The recommend temperature is 0 for the Freezer and 38 for the Refrigerator.
Why the freezer is not cold enough to freeze everything inside even if the temperature is set at 7 (full).
Our whirlpool will not turn on. There is power to the unit, the lights are on but both settings are - and -. I push the buttons but nothing happens .Is there a reset button>
Our whirlpool will not cool. The motor will not turn on. What can i do??
I am confused about the temperature....factory set is "4" for both refrigerator and freezer but manual is suggesting "0" for freezer and "38" for refrigerator.
is there a door alarm?
This unit does not have a door alarm.
is there a door alarm?
is there a door alarm
Recommended temperature settings for both freezer and refrigerator. On system 1 to 7
The recommended temperatures are 38°F (3°C) for the refrigerator and 0°F (-18°C) for the freezer.
Submit your question
If you have any questions about this product, please ask here.
