Loading ...
Loading ...
Loading ...
Replacing the Filter
When the filter needs to be replaced, an alert will appear in the
Puricare Mini app.
1. Remove the filter cover and the old filter.
2. Insert a new filter and reassemble the filter cover. See
Installing the Filter for more details.
3. Once the filter has been replaced, select the Filter
Management menu in the app and tap the Filter Replacement
button to reset the filter status.
Cleaning the Product Exterior
1. Remove dust from the air
inlet and outlet using a
vacuum cleaner.
2. Wipe the exterior with a
soft cloth.
NOTE
• Do not store the appliance in a humid location or in direct
sunlight.
• After storing the product for a long time, charge the battery
fully before use.
• If the product is unused for a long period, charge the battery
fully every 6 months to avoid battery malfunction.
Storage
If the appliance is not used for a long period of time, store it in a
dry place out of direct sunlight.
1. Before storing, run the product for an hour or more in a clean,
dry area to remove any moisture inside the product.
2. Unplug and disconnect the charging cable and press the Start/
Stop button for 5 seconds to turn the product completely off.
3. Protect the product from dust, insects, or moisture, and store
it out of direct sunlight.
Symptoms Solution
The appliance
does not
operate.
• Charge the battery.
• Make sure that the ambient temperature is not
excessively high or low.
• Use an adapter of 1.8 A or higher.
Fan is noisy even
on the lowest
speed.
• Thoroughly clean the ultra-fine filter.
• Replace the filter.
The indoor air is
not purified well
enough.
• Ventilate the indoor air before you use the product.
• Clean the ultra-fine filter properly.
• Replace the filter.
• Use a product that fits the size of the room.
• Do not use the product near open windows, doors, or
other areas where outside air enters frequently.
• Remove foreign objects from the air inputs.
• Move the appliance and install it again.
The air quality
indicator light
stays red.
• If the concentration of particulates is more than the
capacity of the product, the display may not change.
• Turn the product off and on by pressing the Start/Stop
button.
• Do not use sprays near the product.
The
concentration of
particulates may
not change.
In a closed area with little ventilation or air exchange,
the air quality may remain the same.
The
concentration of
particulates
stays high.
In an environment or open space where outside air is
supplied continuously, the concentration may remain
high.
A strange odor
comes out from
the air outlet as
well as the filter.
• The product is not meant to replace ventilation devices.
Open doors or windows or use vent hood to ventilate
smoke or strong odors before using the product.
• Replace the filter. The filter replacement frequency may
differ depending on the usage environment.
Cannot pair with
Bluetooth device.
• Reset the Bluetooth connection on your mobile device
and try again.
• Make sure that the Bluetooth setting is turned on.
• Remove obstacles between the product and the mobile
device.
• Bluetooth pairing may not work depending on the
mobile device or the surrounding environment.
TROUBLESHOOTING
CAUTION
!
• Do not wipe the appliance surface using sulfuric acid,
hydrochloric acid or organic solvent (thinner, kerosene etc.) or
attach a sticker on the appliance.
• Do not allow water to enter the appliance.
CAUTION
!
• Do not store the appliance on the dashboard of a vehicle.
Prolonged exposure of the product to direct sunlight and
excessive temperatures may cause explosion, fire or product
malfunction.
SMART FUNCTIONS
Monitoring Air Quality
Use the Puricare Mini app to select when the particulate sensor
operates.
- Turns On with Product
- Always On: Monitors the air quality even when the product is
in standby mode.
NOTE
• The concentration of particulates could be affected by cooking
or using humidifiers, sprays or other products which generate
steam or fine particles.
• Even two products placed in the same space could measure
the concentration of particulates differently due to air
circulation.
• The concentration of particulates displayed may change with
environmental factors such as the presence of sofas, beds,
carpets, vacuum cleaners, humidity, smoke, bugs, pets or
cooking oils.
• The PM concentration may be affected by changes in the
outside environment such as construction, heavy traffic or
pollen.
• The concentration of particulates could be higher near outside
doors, windows, vents or in areas where outside air enters.
Outside airflow near the particulate sensor might interrupt
normal operation of the sensor and cause the PM level shown
to be different than the actual PM level.
• The battery runtime may be greatly reduced when the air
quality monitoring is running.
• PM (particulate matter) concentration is displayed in
increments of 1 unit, from 8 to 999. PM concentration values
are based on the data sheet provided by the sensor
manufacturer.
• The PM concentration measurement was tested using LG
Electronics’ standard test materials.
Open Source Software Notice Information
To obtain the source code under GPL, LGPL, MPL, and other open
source licenses, that is contained in this product, please visit
http://opensource.lge.com. In addition to the source code, all
referred license terms, warranty disclaimers and copyright
notices are available for download.
LG Electronics will also provide open source code to you on
CD-ROM for a charge covering the cost of performing such
distribution (such as the cost of media, shipping, and handling)
for a period of three years after our last shipment of this
product. This offer is valid to anyone in receipt of this
information.
Pairing
Pairing is a process of mutual registration of Bluetooth devices.
Once pairing is complete, no further pairing is required.
1. Run the Puricare Mini app on the mobile device and press the
Start Registration button.
2. Press the Fan Speed button on the product until the
Bluetooth indicator begins to blink.
3. Select a product to register from the app screen on your
mobile device.
4. When the Bluetooth connection between the app and the
product is established, the Bluetooth indicator light on the
product will turn on.
5. If pairing with the mobile device is not established within 3
minutes, the Bluetooth indicator light will turn off.
NOTE
• For best results during pairing, keep your mobile device and
the product next to each other.
- Pairing may not be successful if there is an obstacle or a
person between the product and the mobile device.
- If a device that uses the same frequency as the Bluetooth
(such as a medical device, microwave oven or wireless LAN) is
near the product and the mobile device, the pairing may fail
due to interference from other radio waves.
• The Bluetooth function may not operate depending on the
specifications of the mobile device.
• Even if you turn off the product, the product will enter the
stand-by mode, allowing you to operate the product through
the connected mobile device.
• If the distance between the product and the mobile device
increases, the Bluetooth connection will be disconnected.
• The Bluetooth indicator lamp turns on when the Bluetooth
connection is active.
• If you have multiple products connected to the same
smartphone, scroll the screen from left to right to select the
desired product.
• The PuriCare Mini app is compatible with Android version 8.0 or
higher.
NOTE
• If the concentration of particulates stays high even after
moving the product to a different area, bring the product in to
a service center to have the particulate sensor cleaned.
The concentration of particulates can be checked using the
Puricare Mini app.
Using the Puricare Mini Bluetooth App
Install the Puricare Mini Bluetooth app on your mobile
device to control the product from your device.
Installing the Puricare Mini App
Search for and install the PuriCare Mini app from Google
Play or the Apple App store on your mobile device. Refer
to the guide in the application for further instructions.
Appearance and specifications may be changed without
notice to improve the quality of the appliance.
The Bluetooth® word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by LG
Electronics Inc. is under license. Other trademarks and trade names
are those of their respective owners.
Product
Power
5 V 1.8 A (AC adapter)
Built-in rechargeable battery
Rated power
consumption
12 W
Exterior dimensions
(W*D*H)
2.7 in x 2.5 in x 7.9 in
(69 mm x 64 mm x 200 mm)
Service temperature 41-104 °F (5~40 °C)
Service humidity 70 % or less
Battery
Capacity
(Typ) 3 600 mAh, 13.32 Wh
(Min) 3 500 mAh, 12.95 Wh
PRODUCT SPECIFICATIONS
WARNING
• Turn the product off and disconnect the USB cable before
removing or replacing the filter.
• Do not spray water directly on the appliance.
Scheduled Maintenance
!
Component Cleaning frequency
Replacement
frequency
Ultra-fine filter
Check monthly for
particulate buildup. If
needed, clean with a
vacuum or soft brush.
6 months
MAINTENANCE
Allergen
filter
Ultra-fine
filter
Cleaning the Ultra-fine Filter
1. Remove the filter cover from the
product.
2. Remove dust from the ultra-fine
filter with a vacuum cleaner or a
soft brush.
NOTE
• The operating environment and frequency and length of use
may affect the filter replacement frequency.
• If the filter is clogged, the product may become noisier than
usual.
• Replacement filters are not covered by the warranty.
To purchase a replacement filter, contact an LG Electronics
service center or visit www.lg.com
Ultra-fine
filter
NOTE
• Do not wash the filter with water.
• Be careful not to damage the ultra-fine filter when you use a
vacuum cleaner.
Overall
Air Quality
Concentration of Particulates
(μg/m
3
)
Color State
PM10
(coarse
particulates)
PM2.5
(fine
particulates)
PM1.0
(particulates
with a diameter
between 1.0
and 2.5 µm)
Red Poor
255 or
more
56 or
more
56 or
more
Orange Unhealthy 155-254 36-55 36-55
Yellow Moderate 55-154 13-35 13-35
Green Good 54 or less 12 or less 12 or less
Bluetooth module Specifications
Model LCB-001
Frequency Range 2402 MHz 2480 MHz
Output Power (Max) < 30 dBm
FCC Notice
The following notice covers the transmitter module contained in
this product.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in
a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the
receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for
help.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Any changes or modifications in construction of this device
which are not expressly approved by the party responsible for
compliance could void the user’s authority to operate the
equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This transmitter must not
be co-located or operating in conjunction with any other antenna
or transmitter.
This equipment should be installed and operated with a minimum
distance of 1 cm (0.4 inches) between the antenna and your
body. Users must follow the specific operating instructions for
satisfying RF exposure compliance.
Bluetooth Functions
Use the Puricare Mini app to control the product from a mobile
device.
1. Start and stop the product.
2. Manually adjust the fan speed to one of 7 levels.
3. Adjust the operating mode.
4. Check the current air quality and the concentration of
particulates by numeric value.
5. Set the air quality monitoring mode.
6. Check your usage history for previous air quality levels.
7. Check the status of the filter and the recommended
replacement period.
8. Turn the product on and off remotely.
Refer to the application for details.
Supplier’s Declaration of Conformity
47 CFR §2.1077 Compliance Information
Trade Name: LG
Responsible Party: LG Electronics USA, Inc.
Address: 1000 Sylvan Ave Englewood Cliffs, NJ 07632
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Loading ...