Loading ...
Loading ...
Loading ...
11
Natural Gas and Propane Gas
• Natural gas installations require the connection of a gas regulator to the cooktop. You will
find this regulator among the accessories supplied with the appliance.
• Assemble the regulator (noting the direction of gas flow) and transition pieces (supplied) in
accordance with the figure below:
• The transition piece on the supply side of the regulator must be provided by the installer. Unions
compatible with the hose fittings must be used and connections tested for gas leaks.
NOTE: Cooktops will function up to 2000 ft (610 m) in altitude without adjustment. If the installation
exceeds these elevations, contact your authorized dealer for a high altitude conversion kit.
• Be sure that the supply connection point is accessible after the appliance installed.
CAUTION: Be sure the hose assembly is restrained from accidental contact with the flue or flue
outlet of an under-counter oven.
Electrical Connection
The electrical connections of the appliance must be carried out in compliance with local standards
and provisions.
Before connecting the appliance, check that:
1. The electrical capacity of the main electrical supply and current sockets suit the maximum
power rating of the appliance. (See the data label attached to the bottom of the cooktop.)
2. The socket or system has an efficient ground connection in compliance with local standards
and provisions. The manufacturer is not responsible for failure to comply with these provisions.
In Case of Electrical Failure
If for any reason a gas control knob is turned ON and there is no electric power to operate the
electronic igniter of the cook top, turn OFF all gas control knobs and wait 5 minutes for the gas to
dissipate before lighting the burner manually. To light the burner manually, carefully hold a lighted
match to the burner ports and push and turn the gas control knob to HI until it lights and then turn the
knob to desired setting.
Loading ...
Loading ...
Loading ...